Datasheet

LUXEON Rebel ANSI Binned Datasheet DS63 (09/07/21) 3
Product Nomenclature
LUXEON Rebel is tested and binned at 350 mA, with current pulse duration of 20 ms. All characteristic charts where the thermal pad is kept at
constant temperature (25ºC typically) are measured with current pulse duration of 20 ms.
The part number designation is explained as follows:
L X M L - A B C D and L X M 3 - A B C D
Where:
A — designates radiation pattern (value P for Lambertian)
B — designates color (W for White)
C — designates nominal CCT
D — designates test current (value 1 for 350 mA)
Therefore products tested and binned at 350 mA follow the part numbering scheme:
L X M L - P x x 1 and L X M 3 - P x x 1
Average Lumen Maintenance Characteristics
Lumen maintenance for solid-state lighting devices (LEDs) is typically defined in terms of the percentage of initial light output remaining after a
specified period of time. Philips Lumileds projects that LUXEON Rebel products will deliver, on average, 70% lumen maintenance (L70) at 50,000
hours of operation at a forward current of up to 700 mA. This projection is based on constant current operation with junction temperature
maintained at or below 135°C. This performance is based on independent test data, Philips Lumileds historical data from tests run on similar
material systems, and internal LUXEON reliability testing. Observation of design limits included in this data sheet is required in order to achieve this
projected lumen maintenance.
Environmental Compliance
Philips Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Rebel is compliant to the
European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS directive. Philips Lumileds will not
intentionally add the following restricted materials to the LUXEON Rebel: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls
(PBB) or polybrominated diphenyl ethers (PBDE).