Datasheet

LUXEON Rebel ANSI Binned Datasheet DS63 (09/07/21) 21
Product Binning and Labeling
Purpose of Product Binning
In the manufacturing of semiconductor products, there is a variation of performance around the average values given in the technical data sheets.
For this reason, Philips Lumileds bins the LED components for luminous flux, color and forward voltage (V
f
).
Decoding Product Bin Labeling
LUXEON Rebel Emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin values for emitters packaged on a single reel.
All emitters packaged within a reel are of the same 3-variable bin combination. Using these codes, it is possible to determine optimum mixing and
matching of products for consistency in a given application.
Reels of 2700K, 3000K, 3500K, 4000K, 5000K, 5700K, 6500K Emitters are labeled with a four digit alphanumeric CAT code following the
format below.
ABCD
A = Flux bin (J, K, L, M etc.)
B and C = Color bin (5A, 5B, 5C etc.)
D = V
f
bin (C, D, E etc.)
Luminous Flux Bins
Table 8 lists the standard photometric luminous flux bins for LUXEON Rebel emitters (tested and binned at 350 mA).
Although several bins are outlined, product availability in a particular bin varies by production run and by product performance.
Not all bins are available in all colors.
Table 8.
Flux Bins - All Colors
Minimum Photometric Flux Maximum Photometric Flux
Bin Code (lm) (lm)
J 65
*
70
K 70
**
80
L 80 90
M 90 100
N 100 120
P 120 140
Q 140 160
R 160 180
S 180 200
*
65 lm for LXM3-PW81, 66 lm for LXM3-PW71, 67 lm for LXM3-PW61
**
75 lm for LXM3-PW51