Datasheet

LUXEON Rebel ANSI Binned Datasheet DS63 (09/07/21) 10
Pad Configuration
Note for Figure 2:
1. The thermal pad is electrically isolated from the anode and cathode contact pads.
Solder Pad Design
Note for Figure 3:
The photograph below shows the recommended LUXEON Rebel layout on Printed Circuit Board (PCB). This design easily achieves a thermal
resistance of 7 K/W.
Application Brief AB32 provides extensive details for this layout. In addition, the .dwg files are available at www.philipslumileds.com.
Figure 2. Pad configuration.
Figure 3. Solder pad layout.