LUXEON Rebel Illumination Portfolio Optimized solutions for illumination applications Technical Datasheet DS63 LUXEON® Rebel Illumination Portfolio ANSI Binned with Minimum CRI Introduction The LUXEON® Rebel Illumination Portfolio emitters in this datasheet deliver optimized combinations of light quality and light output needed for today’s lighting applications.
Table of Contents Product Nomenclature.................................................................................................................................................3 Average Lumen Maintenance Characteristics.........................................................................................................3 Environmental Compliance..........................................................................................................................................
Product Nomenclature LUXEON Rebel is tested and binned at 350 mA, with current pulse duration of 20 ms. All characteristic charts where the thermal pad is kept at constant temperature (25ºC typically) are measured with current pulse duration of 20 ms.
Product Selection Product Selection for LUXEON Rebel Thermal Pad Temperature = 25°C Table 1. Part Minimum Typical Nominal CCT Number CRI CRI Minimum Luminous Flux (lm) FV Typical Luminous Flux FV 2700K LXM3-PW81 80 85 65 73 3000K 3000K 3500K 4000K 4000K 5000K 5700K 6500K LXM3-PW71 LXML-PW71 LXM3-PW61 LXML-PW51 LXM3-PW51 LXML-PW31 LXML-PW21 LXML-PW11 80 85 80 60 80 65 65 65 85 90 85 70 85 70 70 70 66 50 67 90 75 90 90 90 77 66 80 105 85 105 105 105 Notes for Table 1: 1.
Optical Characteristics LUXEON Rebel at Test Current [1] Thermal Pad Temperature = 25°C Table 2. Color Temperature [2] CCT Nominal CCT Min. Typ. Max. 2700K 3000K 3000K 3500K 4000K 4000K 5000K 5700K 6500K 2580K 2870K 2870K 3220K 3710K 3710K 4745K 5310K 6020K 2725K 3045K 3045K 3465K 3985K 3985K 5028K 5665K 6530K 2870K 3220K 3220K 3710K 4260K 4260K 5311K 6020K 7040K Typical Total Included Angle [3] (degrees) u0.
Electrical Characteristics Electrical Characteristics at 350 mA for LUXEON Rebel Thermal Pad Temperature = 25ºC Table 3. Forward Voltage Vf [1] (V) Nominal CCT Min. Typ. Max. 2700K, 3000K, 3500K, 4000K, 5000K, 5700K, 6500K 2.55 3.00 3.99 Typical Temperature Coefficient of Forward Voltage [2] (mV/°C) DVf / DTJ Typical Thermal Resistance Junction to Thermal Pad (°C/W) Ru J-C -2.0 to -4.0 10 Notes for Table 3: 1.
Absolute Maximum Ratings Table 5.
Reflow Soldering Characteristics JEDEC 020c Temperature Profile for Table 7. Table 7.
Mechanical Dimensions Figure 1. Package outline drawing. Notes for Figure 1: 1. Do not handle the device by the lens—care must be taken to avoid damage to the lens or the interior of the device that can be damaged by excessive force to the lens. 2. Drawings not to scale. 3. All dimensions are in millimeters. 4. The thermal pad is electrically isolated from the anode and cathode contact pads.
Pad Configuration Figure 2. Pad configuration. Note for Figure 2: 1. The thermal pad is electrically isolated from the anode and cathode contact pads. Solder Pad Design Figure 3. Solder pad layout. Note for Figure 3: The photograph below shows the recommended LUXEON Rebel layout on Printed Circuit Board (PCB). This design easily achieves a thermal resistance of 7 K/W. Application Brief AB32 provides extensive details for this layout. In addition, the .dwg files are available at www.philipslumileds.com.
Relative Spectral Distribution vs. Wavelength Characteristics LXM3-PW81 (2700K) at Test Current, Thermal Pad Temperature = 25°C Rela ve Spectral Power Distribu on 1 0.8 0.6 0.4 0.2 0 350 400 450 500 550 600 650 700 750 800 Wavelength (nm) Figure 4. Color spectrum of 2700K emitters, integrated measurement. LXM3-PW71 (3000K) at Test Current, Thermal Pad Temperature = 25°C Rela ve Spectral Power Distribu on 1 0.8 0.6 0.4 0.
Relative Spectral Distribution vs. Wavelength Characteristics, Continued LXML-PW71 (3000K) at Test Current, Thermal Pad Temperature = 25°C Rela ve Spectral Power Distribu on 1 0.8 0.6 0.4 0.2 0 350 400 450 500 550 600 650 700 750 800 Wavelength (nm) Figure 6. Color spectrum of 3000K, 85 minimum CRI emitters, integrated measurement. LXML-PW61 (3500K) at Test Current, Thermal Pad Temperature = 25°C Rela ve Spectral Power Distribu on 1 0.8 0.6 0.4 0.
Relative Spectral Distribution vs. Wavelength Characteristics, Continued LXM3-PW51 (4000K) at Test Current, Thermal Pad Temperature = 25°C Rela ve Spectral Power Distribu on 1 0.8 0.6 0.4 0.2 0 350 400 450 500 550 600 650 700 750 800 Wavelength (nm) Figure 8. Color spectrum of 4000K, 80 minimum CRI emitters, integrated measurement. LXML-PW51 (4000K) at Test Current, Thermal Pad Temperature = 25°C Rela ve Spectral Power Distribu on 1 0.8 0.6 0.4 0.
Relative Spectral Distribution vs. Wavelength Characteristics, Continued LXML-PW31 (5000K), LXML-PW21 (5700K) and LXML-PW11 (6500K) at Test Current, Thermal Pad Temperature = 25°C Rela ve Spectral Power Distribu on 1 0.8 0.6 0.4 0.2 0 350 400 450 500 550 600 650 700 750 800 Wavelength (nm) Figure 10. Color spectrum of 5000K, 5700K and 6500K emitters, integrated measurement.
Light Output Characteristics over Temperature All Parts Except LXML-PW51 at Test Current Normalized Luminous Flux If = 350 mA, mean and +/- 3 std dev 1.10 Normalized Luminous Flux 350 mA 1.00 0.90 0.80 0.70 -25 0 25 50 75 100 125 Thermal Pad Temperature Tj (C) Figure 11. Relative light output vs. thermal pad temperature. LXML-PW51 at Test Current Normalized Luminous Flux If = 350 mA, mean and +/- 3 std dev 1.10 Normalized Luminous Flux 350 mA 1.00 0.90 0.80 0.
Typical Forward Current Characteristics Typical Forward Current Characteristics Thermal Pad Temperature = 25°C 1200 Forward ward Current (mA) 1000 800 600 400 200 0 24 2.4 26 2.6 2 8 2.8 3 32 3.2 34 3.4 36 3.6 Forward Voltage (V) Figure 13. Forward current vs. forward voltage. Typical Relative Luminous Flux vs. Forward Current Thermal Pad Temperature = 25°C 2.50 2.25 2.00 Relative Luminous Flux 1.75 1.50 1.25 1 00 1.00 0.75 0.50 0.25 0 00 0.
Current Derating Curves Current Derating Curve for 350 mA Drive Current 400 IF - Forward orward Current (mA) A) 350 300 250 15°C/W 200 25°C/W 150 35°C/W 100 45°C/W 50 0 0 25 50 75 100 125 150 175 TA - Ambient Temperature (°C) Figure 15. Maximum forward current vs. ambient temperature, based on TJMAX = 150ºC.
Typical Radiation Patterns Typical Spatial Radiation Pattern for Lambertian 100% 90% Relative elative Intensity (%) 80% 70% 60% 50% 40% 30% 20% 10% 90 75 60 45 30 15 0 -15 15 -30 30 -45 45 -60 60 -75 75 -90 90 0% Angular Displacement (deg) Figure 17. Typical representative spatial radiation pattern for lambertian. Typical Polar Radiation Pattern for Lambertian 0º 30º - 30º - 60º 60º - 90º 0 20% 40% 60% 80% 90º 100% Figure 18. Typical polar radiation pattern for lambertian.
Emitter Pocket Tape Packaging 20 1000 50 Figure 19. Emitter pocket tape packaging.
Emitter Reel Packaging Figure 20. Emitter reel packaging.
Product Binning and Labeling Purpose of Product Binning In the manufacturing of semiconductor products, there is a variation of performance around the average values given in the technical data sheets. For this reason, Philips Lumileds bins the LED components for luminous flux, color and forward voltage (Vf). Decoding Product Bin Labeling LUXEON Rebel Emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin values for emitters packaged on a single reel.
LUXEON Rebel ANSI Bin Structure Figure 21. LUXEON Rebel ANSI bin structure.
LUXEON Rebel ANSI Bin Coordinates LUXEON Rebel Emitters are tested and binned by x,y coordinates. 32 Color Bins, CCT Range 2580K to 7040K Table 9. Nominal CCT Bin Code x LUXEON Rebel ANSI Bin Coordinates y Nominal CCT Bin Code x y 8A 8B 0.458 614 0.446 470 0.437 300 0.448 286 0.468 732 0.456 200 0.410 315 0.407 117 6A 0.389 300 0.391 847 0.428 946 0.426 000 6B 0.408 216 0.394 131 0.388 900 0.401 706 0.414 622 0.399 600 0.392 153 0.384 815 0.369 000 0.
LUXEON Rebel ANSI Bin Coordinates, Continued Table 9, Continued. Nominal CCT Bin Code x 4A 4B 4500K 4C 4D 3A 3B 5000K 3C 3D 0.361 112 0.352 638 0.351 200 0.359 037 0.364 112 0.354 800 0.352 638 0.361 112 0.373 600 0.364 112 0.361 112 0.369 655 0.369 655 0.361 112 0.359 037 0.367 000 0.344 719 0.336 916 0.336 600 0.343 985 0.346 260 0.337 600 0.336 916 0.344 719 0.355 100 0.
Forward Voltage Bins Table 10 lists minimum and maximum Vf bin values per emitter. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Bin Code B C D E F G LUXEON Rebel ANSI Binned Datasheet DS63 (09/07/21) Table 10. Vf Bins Minimum Forward Voltage (V) 2.55 2.79 3.03 3.27 3.51 3.75 Maximum Forward Voltage (V) 2.79 3.03 3.27 3.51 3.75 3.
Company Information Philips Lumileds is the world’s leading provider of power LEDs for everyday lighting applications. The company’s records for light output, efficacy and thermal management are direct results of the ongoing commitment to advancing solid-state lighting technology and enabling lighting solutions that are more environmentally friendly, help reduce CO2 emissions and reduce the need for power plant expansion.
