Instructions / Assembly

1 OF 3

ASSEMBLY INSTRUCTIONS

STEP 1 STEP 2

CHESTER QUEEN BED

PART LIST

ITEM DESCRIPTION

QTY

HEADBOARD PANEL 1 PC

FOOTBOARD 1 PC

BED LEG 4 PCS

SIDE RAIL 2 PCS

HEADBOARD SUPPORT WOOD

2 PCS

HEADBOARD 1 PC

CENTER RAIL 1 PC

CENTER RAIL LEG 3 PCS

BED SLAT

1 SET

HARDWARE LIST

ITEM DESCRIPTION

QTY

JCBB BOLT M8 x 60mm 8 PCS

M8 FLAT WASHER 8 PCS

M8 SPRING WASHER 8 PCS

WOOD SCREW M4 x 20mm 2 PCS

WOOD SCREW M4 x 38mm 9 PCs

M5 ALLEN KEY (BALL SHAPE)

1 PCS

Read this instruction carefully. See hardware and furniture part list for guidance.

Be sure all parts are complete, before you assemble. Place all wooden furniture

parts on a clean and flat soft surface to prevent from being scratched.

Follow the figure to start assembling.

CAUTION : 1. Do not FULLY - TIGHTEN the nuts or nut bolts until they are ready for assembly.

2. Do not OVER - TIGHTEN the nuts or bolts to avoid causing damages to the thread.

3. Keep all hardware parts out of reach of children.

NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.

Tools needed : Screwdriver & Rubber Mallet (not provided).

PAGE 1
ASSEMBLY INSTRUCTIONS CHESTER QUEEN BED Read this instruction carefully. See hardware and furniture part list for guidance. Be sure all parts are complete, before you assemble. Place all wooden furniture parts on a clean and flat soft surface to prevent from being scratched. Follow the figure to start assembling. CAUTION : 1. Do not FULLY - TIGHTEN the nuts or nut bolts until they are ready for assembly. 2. Do not OVER - TIGHTEN the nuts or bolts to avoid causing damages to the thread. 3.
PAGE 2
ASSEMBLY INSTRUCTIONS STEP 3 2 OF 3 STEP 4 STEP 4.1 E E A D 6 STEP 4.
PAGE 3
ASSEMBLY INSTRUCTIONS STEP 7 STEP 8 3 OF 3 G EXAMPLE 3 H 4 STEP 9 G STEP 10 5 * When moving the bed position, the center support legs must be adjusted or straightened to avoid any broken problems.