Instructions / Assembly

Read this instruction carefully. See hardware and furniture part list for guidance.

Be sure all parts are complete, before you assemble. Place all wooden furniture

parts on a clean and flat soft surface to prevent from being scratched.

Follow the figure to start assembling.

CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.

2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.

3. Keep all hardware parts out of reach of children.

NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.

ASSEMBLY INSTRUCTIONS

STEP 1

PART LIST

ITEM DESCRIPTION

QTY

HEADBOARD 1 PC

FOOTBOARD 1 PC

SIDE RAIL 2 PCS

CENTER RAIL 1 PC

CENTER SUPPORT LEG 3 PCS

BED SLAT 26 PCS

BED LEG 4 PCS

CENTER SUPPORT 2 PCS

PART LIST

ITEM DESCRIPTION

QTY

JCBB BOLT M8 x 30mm 8 PCS

WOOD SCREW M3.5 x 16mm 8 PCS

BED SLAT SIDE FITTER 26 PCS

BED SLAT CENTER FITTER 13 PCS

PVC BLACK WASHER 4 PCS

M5 ALLEN KEY 1 PC

* When moving the bed position, the center support legs

must be adjust to be straight to avoid any broken problem.

STEP 2 STEP 3

Palm

STEP 4 STEP 5

Palm

Altos Hermosa Queen Bed

PAGE 1
ASSEMBLY INSTRUCTIONS Altos Hermosa Queen Bed Read this instruction carefully. See hardware and furniture part list for guidance. Be sure all parts are complete, before you assemble. Place all wooden furniture parts on a clean and flat soft surface to prevent from being scratched. Follow the figure to start assembling. CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed. 2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread. 3.