Instructions / Assembly
Step 4:
Follow Step 1 and 2 to install
the fourth piece of glass.
Secure the position with the
screws but do NOT tighten
the screws.
Step 5:
Install the final two pieces
of clips and plastic glides.
Secure the position with
the screws but do NOT
tighten the screws.
Step 6:
Adjust the glasses positions.
Tighten all the screws an d
put the glass shie ld
upside-down, so the plastic
glides are at the bottom.
The glass shield is now
ready to use.
Plastic glide
PAGE 16