User's Guide

ASSEMBLY INSTRUCTIONS
lamp to reveal the stabalizing pad.
• Clean the intended installation surface to remove dust or
particulates. If bottom of lamp loses its stickiness, it can be
cleaned with a wet cloth.
• A tripod screw mount is also included, for a more
permanent installation.
• Install the included power cord to rear of lamp and then
plug into any wall outlet.
USING YOUR LUX BROOKLYN AURA LED LAMP:
• Turn the light on by touching the power button on the front
of the lamp.
• Press the power button again to cycle through the thr
ee
brightness levels (600, 250, 20 lumens).
• The wireless Qi Charging pad will only work with
Qi-enabled devices. For a full list of compatible devices,
visit: https://www.wirelesspowerconsortium.com.
• NOTE: The wireless charger will generally charge any
compatible mobile device provided the case is no thicker
than 3mm. However
, if the back panel is thicke
r
, or if the
case contains a battery, ca
r
ds, or other metal, it may
pr
event the device from wirelessly charging.
• When using the lamp to charge your devices, unplug or
r
emove the devices once batteries are ful
l.
SAFETY INFORMATION:
replaced; if the cable is damaged the entire power supply
must be replaced.
• For indoor use only; do not use outdoors or in damp
locations.
• Switch the lamp off before disconnecting the power.
• Do not look directly at the LEDs when they are illuminated.