Operation Manual

ANDROID ETHERNET SETUP

Start the Luvion App

Tap ‘Click here to add device’

Enter the UID code for the bridge in one of the following ways:

A. Tap Scan and scan the QR code on the

side of the bridge using your device’s camera. You

may be prompted to select the app that will be

used to scan the QR code. Select ‘Google’ and

press ‘Always to continue’.

B: If your device is on the same network as the

bridge, tap ‘Search’ to detect the bridge UID

automatically. Tap the UID to enter.

C: Tap UID and manually enter the UID printed on

the side of the bridge. You may need to do this

if your device does not have a camera.

Enter the default password 000000 (six times

zero) and enter a name for your

monitor.