Operation Manual

24
3. Place the monitor onto the power/network connector on the bridge. Use the stand-up guides to help place
the monitor. The monitor will charge when connected to the bridge. It takes 5 hours to fully charge a battery.
On your smartphone or tablet, download our Luvion App for free from the App Store (iPhone®) or the Google
Play Store (Android™).
IPHONE ETHERNET SETUP
1
2
Complete chapter ‘Getting Started’ and launch the Luvion App.
Go to ‘Add Device’- Enter the UID code for the bridge in
one of the following ways:
Option A: Tap QRCode and scan the QR code (the black and
white square found on the side of the bridge).
Option B: Tap Add and manually enter the UID printed below
the QR code on the side of the bridge. You may need to do this
if your device does not have a camera.
Option C: If your device is on the same network as
the bridge, it will automatically detect the bridge UID. Tap the UID to
enter.