Datasheet

A
cceleration, Velocity, Displacement
SD Card real time data logger
VIBRATION METER
Model : VB-8206SD
FEATURES
* Applications for industrial vibration monitoring : Power Current Normal operation ( w/o SD card save
All industrial machinery vibrates. The level of vibration is data and LCD Backlight is OFF) :
a useful guide to machine condition. Poor balance,
Approx. DC 15 mA.
misalignment & looseness of the structure will cause the When SD card save the data and LCD
vibration level increase, it is a sure sign that the Backlight is OFF) :
maintenance is needed.
Approx. DC 36 mA.
* Frequency range 10 Hz - 1 kHz, sensitivity relative meet Weight Meter :
ISO 2954. 515 g/ 1.13 LB.
* Professional vibration meter supply with vibration sensor Probe with cable and magnetic base :
& magnetic base, full set. 99 g/0,22 LB
* Metric & Imperial display unit Dimension Meter :
* Acceleration, Velocity, Displacement measurement. 203 x 76 x 38 mm
* RMS, Peak value, Max. hold measurement. Vibration sensor probe:
* Max. Hold reset button, Zero Button. Round 16 mm Dia. x 37 mm.
* Wide frequency range. Cable length : 1.2 meter.
* Data hold button to freeze the desired reading. Accessories * Instruction manual..........................
.
1 PC
* Memory function to record maximum and minimum Included * Hard carryin
g
case, CA-06................1 PC
reading with recall. *
V
ibration sensor with cable...............1 PC
* Separate vibration probe with magnetic base, easy operation. * Ma
g
netic base.................................1 PC
* Real time SD memory card Datalogger, it Built-in Clock Optional SD Card ( 2 G )
and Calendar, real time data recorder , sampling time set Accessories AC to DC 9V adapter.
from 1 second to 3600 seconds. USB cable, USB-01.
* Manual datalogger is available ( set the sampling RS232 cable, UPCB-02.
time to 0 ), during execute the manual datalogger Data Acquisition software,SW-U801-WIN.
function, it can set the different position ( location ) No.
( position 1 to position 99 ).
* Innovation and easy operation, computer is not need
to setup extra software, after execute datalogger, just
take away the SD card from the meter and plug in the ELECTRICAL SPECIFICATIONS (23± 5 )℃
SD card into the computer, it can down load the all the
measured value with the time information ( Acceleration ( RMS, Peak, Max Hold )
year/month/date/ hour/minute/second ) to the Excel
directly, then user can make the further data or graphic Unit m/s^2
analysis by themselves. Range 0.5 to 199.9 m/s^2
* SD card capacity : 1 GB to 16 GB. Resolution 0.1 m/s^2
* LCD with green light backlight, easy reading. Accuracy ± ( 5 % + 2 d ) reading
* Can default auto power off or manual power off. @ 160 Hz, 80 Hz, 23 ± 5 ℃
* Data hold, record max. and min. reading. Calibration 50 m/S^2 ( 160 Hz )
* Microcomputer circuit, high accuracy. Point
* Power by UM3/AA ( 1.5 V ) x 6 batteries or DC 9V adapter.
* RS232/USB PC COMPUTER interface. Unit G @ 1 G = 9.8 m/s^2
Range 0.05 to 20.39 G
GENERAL SPECIFICATIONS Resolution 0.01 G
Circuit Custom one-chip of microprocessor LSI Accuracy ± ( 5 % + 2 d ) reading
circuit.
@ 160 Hz, 80 Hz, 23 ± 5 ℃
Display LCD size : 52 mm x 38 mm Calibration 50 m/S^2 ( 160 Hz )
LCD with green backlight ( ON/OFF ). Point
Measurement Velocity, Acceleration, Displacement
Unit ft/s^2
Function Acceleration, Velocity : Range 2 to 656 ft/s^2
RMS, Peak, Max. Hold. Resolution 1 ft/s^2
Displacement : Accuracy ± ( 5 % + 2 d ) reading
p-p ( peak-peak ), Max-hold p-p.
@ 160 Hz, 80 Hz, 23 ± 5 ℃
Unit Measurement Metric Imperial Calibration 50 m/S^2 ( 160 Hz )
Acceleration meter/s^2,G ft/s^2, Point
Velocity mm/s, cm/s inch/s Remark :
Displacement mm inch RMS : To measure the true RMS value.
Frequency 10 Hz to 1 KHz Peak : To measure and update the peak value.
range * Sensitivity relative during the Max. Hold : To measure and update the max. peak value.
the frequency range meet ISO 2954
Refer to table 1, page . Velocity ( RMS, Peak, Max Hold )
Circuit Exclusive microcomputer circuit.
Peak Acceleration, Velocity : Unit mm/s
Measurement To measure and update the peak Range 0.5 to 199.9 mm/s
value. Resolution 0. 1 mm/s
Displacement : Accuracy ± ( 5 % + 2 d ) reading
To measure and update the peak to
@ 160 Hz, 80 Hz, 23 ± 5 ℃
peak ( p-p ) value. Calibration 50 mm/s ( 160 Hz )
Max. Hold Acceleration, Velocity : Point
Measurement To measure and update the max. peak
value. Unit cm/s
Displacement : Range 0.05 to 19.99 cm/s
To measure and update the max. Resolution 0. 01 cm/s
peak to peak ( p-p ) value. Accuracy ± ( 5 % + 2 d ) reading
Zero Button Under Acceleration ( RMS ) measurement, @ 160 Hz, 80 Hz, 23 ± 5 ℃
sensor motionless , press Logger Button Calibration 50 mm/s ( 160 Hz )
> 5 seconds. Point
Max. Hold Reset Under Max. hold measurement, press
Button Logger Button > 5 seconds. Unit inch/s
Datalogger Auto 1 second to 3600 seconds Range 0.02 to 7.87 inch/s
Sampling Time @ Sampling time can set to 1 second, Resolution 0.01 inch/s
Setting range but memory data may loss. Accuracy ± ( 5 % + 2 d ) reading
Manual Push the data logger button @ 160 Hz, 80 Hz, 23 ± 5 ℃
once will save data one time. Calibration 50 mm/s ( 160 Hz )
@ Set the sampling time to Point
0 second. Remark :
@ Manual mode, can also select the RMS : To measure the true RMS value.
1 to 99 position ( Location ) no. Peak : To measure and update the peak value.
Memory Card SD memory card. 1 GB to 16 GB. Max. Hold : To measure and update the max. peak value.
Advanced * Set clock time ( Year/Month/Date,
setting Hour/Minute/ Second ) Displacement ( p-p, Max Hold p-p )
* Decimal point of SD card setting
* Auto power OFF management Unit mm
* Set beep Sound ON/OFF Range 1.999 mm
* Set sampling time Resolution 0.001 mm
* SD memory card Format Accuracy ± ( 5 % + 2 d ) reading
Data Hold Freeze the display reading. @ 160 Hz, 80 Hz, 23 ± 5 ℃
Memory Recall Maximum & Minimum value. Calibration 0.141 mm ( 160 Hz )
Sampling Time Approx. 1 second. Point
of Display
Data Output RS 232/USB PC computer interface. Unit inch
* Connect the optional RS232 cable Range 0.078 inch
UPCB-02 will get the RS232 plug. Resolution 0.001 inch
* Connect the optional USB cable Accuracy ± ( 5 % + 2 d ) reading
USB-01 will get the USB plug. @ 160 Hz, 80 Hz, 23 ± 5 ℃
Operating 0 to 50 .℃ Calibration 0.141 mm ( 160 Hz )
Temperature Point
Operating Less than 85% R.H. Remark :
Humidity p-p :
Power Supply *
A
Alkaline or heavy duty DC 1.5 V battery To measure the Peak to Peak value.
( UM3, AA ) x 6 PCs, or equivalent. Max. Hold p-p :
*
A
DC 9V adapter input. ( AC/DC power To measure and update the max. Peak to Peak value.
adapter is optional ).
PATENT CHINA : ZL 2008 2 0189918.5 ZL 2008 2 0189917.0 TAIWAN : M 358970 M 359043
Germany : Nr. 20 2008 016 337.4 JAPAN : 3151214 U.S.A. : Pending
* Appearance and specifications listed in this brochure are subject to change without notice. 1101-VB8206SD