Cut Sheet
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
3691167b 7 10.26.21
Wallbox ControlsStandalone Controls
Sunnata
Note: For dimming MLV fixtures, the maximum lamp wattage is typically 70%-85% of the transformer’s VA rating. For actual transformer efficiency, contact the
manufacturer. The total VA rating of the transformer(s) shall not exceed the VA rating of the dimmer.
Load Type
Minimum
Load
A
Not Ganged
B
End of Gang
C
Middle of
Gang
Neutral
Connection
Required
Phase
Mode
2
STCL-153M
3
LED 1 LED 150 W 150 W 150 W No —
CFL 1 CFL bulb 150 W 150 W 150 W No —
Incandescent / Halogen 25 W 600 W 500 W 400 W No —
ST-PRO-N
3,4
LED 1 LED 250 W 200 W 150 W
Required
1
Either
MLV Transformer
with LEDs
See Application Note #559 (P/N 048559) at
www.lutron.com No Derating Required
Forward
ELV Transformer
with LEDs
Reverse
MLV Transformer
with Halogen
10 W
400 VA
(300 W)
No Derating Required Forward
ELV Transformer
with Halogen
10 W 500 W 400 W 300 W Reverse
Incandescent / Halogen 10 W 500 W 400 W 300 W Either
Dimmable Fluorescent
Ballast
1 ballast
3.3 A
(400 VA)
No Derating Required Forward
Hi-lume 1% 2-wire (LTE)
LED Driver
1 driver
3.3 A (400 W)
20 drivers
max.
No Derating Required Forward
PHPM-PA / 3F and
GRX-TVI
4
1 interface 3 interfaces No Derating Required Forward
ST-6ANS
4,5,6
LED Lighting 1 LED 6 A 4 A 4 A
Required
1
—
Other Lighting Loads 10 W / VA 6 A 4 A 4 A —
Motor 0.08 A 1/10 HP 3 A 1/10 HP 3 A 1/10 HP 3 A —
A B B B C B
1
Neutral is required for all load types.
2
Phase Mode default setting is Reverse-Phase. (-PRO-N only)
3
Do not install dimmers to control receptacles or motor-operated appliances.
4
Power boosters / Load Interfaces: -ST-PRO-N and -ST-6ANS can be used to control power boosters / load interfaces. For a list of compatiible power
boosters / load interfaces see Compatible Power Boosters and Load Interfaces, page 8.
5
Do not install switches to control receptacles.
6
Switch Load Type:
-6ANS: Designed for use with permanently installed 120 V~ incandescent, MLV, ELV, tungsten halogen, fluorescent, LED, CFL, or motor loads.
Load Type and Capacity
7