Cut Sheet

ManualsBrandsLutron ManualsDimmers & Switches - WiredSunnata LED+ Touch Dimmer, White (Clamshell)

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

3691167b 1 10.26.21

Wallbox ControlsStandalone Controls

Sunnata

Sunnata Standalone Controls

Touch dimmer (and coordinating products) with next

generation design and technology.

Features

• Touch technology with intuitive on / off paddle switch that ﬁts

in a standard designer wallplate opening.

•

Advanced dimming technology designed for compatibility

with a broad range of high efﬁcacy bulbs.

• Dimmers and switches contain MyLevel Personalization

Advanced Feature Mode to customize the control.

• Low-end and high-end adjustments to accommodate a wide

range of bulbs.

• White light bar provides locator light to easily ﬁnd the switch

in the dark. Brightness of locator light is adjustable through

MyLevel Personalization. Locator light can also be turned off.

• Can be used in single-pole, multi-location

, or 3-way

mechanical switch

applications.

• Coordinating Claro and Stainless Steel wallplates available

separately.

• 100% factory tested.

• NEMA SSL-7A Compliant.

• UL® Listed.

PRO Dimmer

ST-PRO -N

PRO Companion Dimmer

ST-RD (works with ST-PRO-N only)

Companion Switch

ST-RS (works with ST-6ANS only)

Switch

ST-6ANS

Sunnata standalone controls can be controlled from multiple locations when paired with the appropriate accessory or companion control

pictured to the right of the main control above.

LED

models only. An additional wiring step is required for 3-way mechanical switch applications. Not for use in 4-way mechanical

switch applications.

NOTE: Main control will only work with companion or

accessory shown to the right. Companions and

accessories are not interchangeable.

LED+ Dimmer

S T C L-15 3 M

Accessory Switch

ST-AS (works with STCL-153M only)

Summary of content (15 pages)

PAGE 1
Sunnata Standalone Controls Wallbox Controls 3691167b 1 10.26.21 Sunnata Standalone Controls Touch dimmer (and coordinating products) with next generation design and technology. Features • Touch technology with intuitive on / off paddle switch that fits in a standard designer wallplate opening. • Advanced dimming technology designed for compatibility with a broad range of high efficacy bulbs. • Dimmers and switches contain MyLevel Personalization Advanced Feature Mode to customize the control.
PAGE 2
Sunnata Standalone Controls Wallbox Controls 3691167b 2 10.26.
PAGE 3
Sunnata Standalone Controls Wallbox Controls 3691167b 3 10.26.
PAGE 4
Sunnata Standalone Controls Wallbox Controls 3691167b 4 10.26.21 Specifications Regulatory Approvals • UL® Listed to U.S. and Canadian safety requirements (UL 1472 / CSA C22.2 184.
PAGE 5
Sunnata Standalone Controls Wallbox Controls 3691167b 5 10.26.21 LED+ and Accessory Switch Dimensions PRO and Companion Dimensions Wired Product Screw Terminal Product 5/16 in (8 mm) 4 $ in (119 mm) 2 ^ in (75 mm) 5/16 in (8 mm) 4 $ in (119 mm) 2 # in (66 mm) 1 3 in (29 mm) 2 # in (66 mm) 1 3 in (29 mm) 2 ^ in (75 mm) Note: Requires a U.S. wallbox 2 1 in (57 mm) deep minimum.
PAGE 6
Sunnata Standalone Controls Wallbox Controls 3691167b 6 10.26.
PAGE 7
Sunnata Standalone Controls Wallbox Controls 3691167b 7 10.26.
PAGE 8
Sunnata Standalone Controls Wallbox Controls 3691167b 8 10.26.21 Mixing Lamp Types Mixing lamp types (using a combination of LED / CFL, Incandescent / Halogen bulbs) and ganging with other dimmers or electronic switches may reduce maximum wattage as shown in the chart below. Example: If you have two dimmers ganged together and you have two 13 W bulbs installed (total LED Wattage = 26 W) on one dimmer, you may add up to 300 W of incandescent or halogen lighting to that one dimmer.
PAGE 9
Sunnata Standalone Controls Wallbox Controls 3691167b 9 10.26.21 Compatible Power Boosters and Load Interfaces Some local controls can be used to control power boosters or load interfaces. Up to three power boosters or load interfaces can be used with one control. See table below for a list of controls and compatible power boosters and load interfaces.
PAGE 10
Sunnata Standalone Controls Wallbox Controls 3691167b 10 10.26.21 Operation LED+ Dimmer Accessory Switch Dimming from LED+ dimmer only ON / OFF only from accessory switches On On • Lights go to full brightness or programmed preset level • See Sunnata Dimmer MyLevel Personalization Application Note #734 (P/N 048734) at www.lutron.
PAGE 11
Sunnata Standalone Controls Wallbox Controls 3691167b 11 10.26.21 MyLevel Personalization Advanced Features Sunnata dimmers and switches contain advanced features that allow users to customize the control to meet their specific needs. For a detailed description of the features and uses, please refer to the Sunnata Dimmer MyLevel Personalization Application Note #734 (P/N 048734) or Sunnata Switch MyLevel Personalization Application Note #793 (P/N 048793) at www.lutron.com/SunnataMyLevel.
PAGE 12
Sunnata Standalone Controls Wallbox Controls 3691167b 12 10.26.21 Wiring Diagrams Single Pole Wiring: STCL-153M Single Pole Application: Dimmer Line / Hot • Black and red wires are interchangeable in this application. • Cap the blue wire with the supplied wire connector. • Do not connect the blue wire to any other wiring or to ground.
PAGE 13
Sunnata Standalone Controls Wallbox Controls 3691167b 13 10.26.21 Wiring Diagrams (continued) Wiring (Using Sunnata Accessory Switch1): STCL-153M with ST-AS Dimmer Line Side Dimmer Line / Hot Red Black Note: ST-AS is NOT compatible with STCL-153P, it works only with STCL-153M.
PAGE 14
Sunnata Standalone Controls Wallbox Controls 3691167b 14 10.26.21 Wiring Diagrams (continued) 4-Way Wiring (Using Sunnata Accessory Switch(es)1,2): STCL-153M with ST-AS Dimmer Line Side Dimmer Line / Hot Accessory Switch Red Black Tag Black Red Accessory Switch Red Black Note: ST-AS is NOT compatible with STCL-153P, it works only with STCL-153M.
PAGE 15
Sunnata Standalone Controls Wallbox Controls 3691167b 15 10.26.21 Wiring Diagrams (continued) Single-Location Installation1 with required Neutral: -PRO-N, -6ANS Dimmer / Switch Blue1 Brass Silver Black Line / Hot Green 120 V~ 50 / 60 Hz Load Ground Neutral 1 Note: Ground connection is a 18 AWG (1.0 mm2) green wire. When using controls in single-location installations, tighten the blue terminal. Do not connect the blue terminal to any other wiring or to ground.