Operating Guide

Controls are 120V
60Hz unless noted.
Global Ordering
see pg.185
Dimmers and Fan Controls
Ships in 48 hrs.
Color Palette
Gloss Finish
Add color suffix to model #
Example: SF-10P-
White
Ivory
Almond
Light Almond
Gray
Brown
Black
Colors meet NEMA color
standards where standards exist
Accessories
and Wallplates
Coordinating designer
accessories and wallplates
sold separately, pg.76.
What’s Included
Control, knob
* Maximum Capacities
For capacities in multigang
installations, see ganging and
derating information, pg.95.
3- and 4-Way Switching
Use with designer switches,
pg.79, or other mechanical
switches.
Single-Gang Wallplate
Dimensions
W: 2.94” (75mm)
H: 4.69” (119mm)
D: 0.30” (7.6mm)
BL
BR
GR
LA
AL
IV
WH
WH
For More Information:
www.lutron.com/skylark
Fax-on-Demand 1·800·523·9466
Description Maximum Capacity* Model # Important Information
Hi-Power 2·4·6
™
Dimming Modules
To increase load capacity up to 30,000W/VA in most popular sources,
use one S-600- or S-603P- and add up to five dimming modules.
See pg.146 for information.
73
To Order/Customer Service • 8am–8pm ET (US/CAN) • 1·888·LUTRON1
Fluorescent Dimming with Magnetic Ballasts
Preset Dimmers with On/Off Switch
Single Pole 10 lamps SF-10P-
Single Pole, 277V 12 lamps SF-12P-277-
3-Way** 10 lamps SF-103P-
3-Way,** 277V 12 lamps SF-12P-277-3-
Products Above: Requires neutral wire connection. Other
manufacturers’ design criteria for their magnetic dimming
ballasts generally do not allow for dimming below 20%.
For approved magnetic ballast manufacturers and derating
information contact the Lutron Technical Support Center.
For best performance and reliability, Lutron strongly recommends
using Hi-lume, Compact SE, Eco-10, Tu-Wire, or TVE
™
electronic
dimming ballasts and appropriate controls, pg.135.
Fluorescent Dimming with
Tu-Wire
®
Electronic Ballasts
Preset Dimmers with On/Off Switch
Single Pole/3-Way** 5A SFTU-5A3P-
Product Above: For best performance use with Lutron Tu-Wire
line-voltage control electronic dimming ballasts. For other
applications please contact the Lutron Technical Support
Center. See 2-Wire Dimming Ballasts, pg.140. Derating
required if ganged, pg.95.
Dimmers (cont.)
Fluorescent Dimming with Hi-lume
®
,
Compact SE
™
, and Eco-10
™
Electronic Ballasts
Preset Dimmers with On/Off Switch
Single Pole 8A SF-10P-
Single Pole, 277V 6A SF-12P-277-
3-Way** 8A SF-103P-
3-Way,** 277V 6A SF-12P-277-3-
Products Above: Use with Lutron Hi-lume, Compact SE,
and Eco-10 line-voltage control electronic dimming ballasts.
See 3-Wire Dimming Ballasts, pgs.136-139. Requires neutral
wire connection. No derating required if ganged.
**
Skylark
®