Installation Guide

3
SF-103P with Magnetic Dimming Ballast SF-10P with Lutron Ballast
NOTE: If the SF-103P does not turn off, or the unit does not turn
on at all, the red and blue wires have been connected incorrectly.
The result of the miswire depends on the position of the other 3-
Way switch. Check the wiring carefully.
SF-103P with one lamp ballast
SF-103P wallbox wiring
White
Yellow
Neutrals
Traveler 1
Red
Blue
Control
Ground
Green or Bare
Traveler 2
Blue
Switch Hot
Blue
Red
Dimmer
Hot
Neutral
Ground
Green or
Bare
White
Yellow
Blue
3-Way
Switch
Lamp
*
* Lamp
Disconnect
Socket
White
Black
Red
Red
Yellow/Blue or Brown
Blue
Magnetic Dimming Ballast
120VAC
60Hz
Blue
Red
Dimmer
Hot
Neutral
Ground
Green or
Bare
White
Yellow
Blue
3-Way
Switch
Lamp
*
* Lamp
Disconnect
Socket
Blue/White
White
Black
Red
Red
Yellow/Blue or Brown
Lamp
*
Yellow
Yellow
Blue
Magnetic Dimming Ballast
120VAC
60Hz
Black
Red
Dimmer
Hot
Neutral
Ground
Green or
Bare
White
Yellow
To Additional Ballasts
Orange
Black
White
Orange
Black
White
Lutron Dimming Ballast
Lutron Dimming Ballast
120VAC
60Hz
SF-10P with Lutron electronic ballast
SF-10P wallbox wiring
White
Yellow
Neutrals
Hot
Switched Hot
Black
Red
Control
Ground
Green or Bare
SF-103P with two lamp ballast
SF-103P with Lutron Ballast
SF-103P with Lutron electronic ballast
Blue
Red
Dimmer
Hot
Neutral
Ground
Green or
Bare
White
Yellow
To Additional Ballasts
Orange
Black
White
Orange
Black
White
Lutron Dimming Ballast
Lutron Dimming Ballast
Blue
3-Way
Switch
120VAC
60Hz
SF-103P wallbox wiring
White
Yellow
Neutrals
Traveler 1
Red
Blue
Control
Ground
Green or Bare
Traveler 2
Blue
Switch Hot