Installation Manual

Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299
Made and printed in the U.S.A. 9/07 P/N 030-825 Rev. E
Worldwide Technical and Sales Assistance
If you have questions concerning the installation or operation of
these products, call the
Lutron Technical Support Center. Please
provide exact model number when calling.
[phone] (U.S.A., Canada, and the Caribbean)
Other Countries call [phone]
Fax [phone]
Visit our web site at www.lutron.com
Limited Warranty
(Valid only in U.S.A., Canada, Puerto Rico, and the Caribbean.)
Lutron will, at its option, repair or replace any unit that is defective in materials or manufacture
within one year after purchase. For warranty service, return unit to place of purchase or mail to
Lutron at 7200 Suter Rd., Coopersburg, PA 18036-1299, postage pre-paid.
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES, AND THE IMPLIED
WARRANTY OF MERCHANTABILITY IS LIMITED TO ONE YEAR FROM PURCHASE. THIS
WARRANTY DOES NOT COVER THE COST OF INSTALLATION, REMOVAL OR REIN-
STALLATION, OR DAMAGE RESULTING FROM MISUSE, ABUSE, OR DAMAGE FROM
IMPROPER WIRING OR INSTALLATION. THIS WARRANTY DOES NOT COVER INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES. LUTRON’S LIABILITY ON ANY CLAIM FOR DAM-
AGES ARISING OUT OF OR IN CONNECTION WITH THE MANUFACTURE, SALE, INSTAL-
LATION, DELIVERY, OR USE OF THE UNIT SHALL NEVER EXCEED THE PURCHASE
PRICE OF THE UNIT.
This warranty gives you specific legal rights, and you may have other rights which vary from
state to state. Some states do not allow the exclusion or limitation of incidental or conse-
quential damages, or limitation on how long an implied warranty may last, so the above limita-
tions may not apply to you.
These products may be covered under one or more of the following U.S. patents: 5,180,886;
D494,138; 7,198,523; D516,512; and corresponding foreign patents. U.S. patents pending.
Lutron, Faedra, Qoto, Spacer System, Ariadni, Diva, GRAFIK Eye, HomeWorks, Maestro,
Nova, Nova T , RadioRA, Skylark, and Vareo are registered trademarks and GRAFIK,
Lyneo, and Hi-Power are trademarks of Lutron Electronics Co., Inc. NEC is a registered
trademark of the National Fire Protection Association, Quincy, Massachusetts.
© 2007 Lutron Electronics Co., Inc.
Plug Assembly Diagram 1
Assemble base to support side.
Cord should be carefully
fed around these walls.
Wide Blade (Neutral)
Narrow Blade (Live)
Plug Wiring Diagram
Neutral Wire (ribbed or striped wire)
Tip: If you prefer to have the cord exit the plug from the other
direction, remove the base from the support side, flip the
base 180° (so that the wide and narrow blades have
changed places), and insert back into the support side. When
plugged into the Lutron receptacle, the cord will now exit in
the other direction.
Plug Assembly Diagram 2
Attach cover side.
Cover side
Secure cover with
attached screw
Support Side
Base
Lamp cord (SPT-2 18/2 0.250 in.—0.270 in.
major diameter wires) (6.35 mm—6.86 mm)
Live Wire
Base