Cut Sheet

Important application notes:

•

Receptacles and plugs for dimming use are UL

listed for use with all Lutron wallbox dimmers

included in this catalog

•

If there is only one electrical feed to the receptacle,

then the duplex DFDU must be used

•

If the hot and dimmed hot feeds to the split

duplex HFDU are supplied from different circuits

or split-wired, with separate switch-legs, a means

to simultaneously disconnect these circuits must

be provided at the panel board where they

circuit breaker or two single-pole circuit breakers

with an approved handle tie can be used to

accomplish this simultaneous disconnect. Feed-

through dimming panels, which are those without

breakers, are recommended when using the HFDU.

•

For detailed information, see Application Notes #91

(Guide to Dimming Table Lamps) and #109 (Guide

to Dimming Portable Lamps via Receptacles) at

www.lutron.com/applicationnotes

120/125 V RP-FDU-10-WH

White

120/125 V RP-FDU-10-BR

Brown

UL/CSA/NOM regulatory approvals

Replacement plugs for dimming

(use with receptacles)

•

This plug required for use with

Lutron

® receptacles for dimming

use—plug will work in standard

receptacle

•

Easily replaces the existing plugs

on lamps

Wallplates and accessories | Architectural

: Architectural matte color codes, see pg. 153

(1-gang wallplate included)

*Metal ﬁnishes are only available as separate

wallplates. Match with separate Black (BL)

controls and accessories.

158A