Cut Sheet

Lutron®
|
5www.lutron.com/radiora2
product specifications
09.01.11
369-221e
Keypad IR Receiver
An integral feature of the RadioRAR 2 lighting control system is to utilize keypads to receive IR signals and
communicate to the rest of the RadioRAR 2 system through RF signals. RadioRAR 2 keypads can receive
IR signals from LutronR wireless remotes (models GRX-IT & GRX-8IT) and 3rd party learnable IR remotes.
RadioRAR 2 Wall-mount Designer keypads
When a keypad receives one of the supported LutronR IR codes, it will simulate the corresponding
button press as shown below. The IR receiver on the back of a keypad allows IR transmitters to
mimic the functions of the buttons on the front of the keypad. For example, if RRD-W3BD is used,
the IR remote maps to the three IR buttons shown below.
IR Mapping
RRD-W1RLD
RRD-W3BD
RRD-W6BRL
RRD-W3BRL
RRD-W5BRLIR
RRD-W2RLD
RRD-W7B
IR Button 1
IR Button 2
IR Button 3
IR Button 4
IR Button 5
IR Button 6
IR Button 0
IR Button 1
IR Button 2
IR Button 0
IR Button 1
IR Button 2
IR Button 0
IR Button 1
IR Button 2
IR Button 0
IR Button 1
IR Button 2
IR Button 3
IR Button 4
IR Button 5
IR Button 0
IR Button 1
IR Button 0
Lower Raise
IR Button 1
IR Button 2
IR Button 3
IR Button 4
IR Button 0
IR IR
Lower Raise
IR IR
Lower Raise
IR IR
Lower Raise
IR IR
Lower Raise
IR IR
Lower Raise
IR IR
RadioRAR 2 keypads can be controlled by LutronR IR remotes (models GRX-IT & GRX-8IT) and 3rd
party learnable IR remotes.
GRX-IT
GRX-8IT
IR Button 1
IR Button 2
IR Button 3
IR Button 4
IR Button 0
IR Raise
IR Lower
IR Button 5
IR Button 6
*IR Button 7
*IR Button 8
*Not functional
in RadioRAR 2
systems.
IR Button 1
IR Button 2
IR Button 3
IR Button 4
IR Button 0
IR Raise
IR Lower
LUTRONLUTRON
Supported IR Remotes