Cut Sheet

®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Vive
PowPak Phase Select Wireless Lighting Control
3691150b 7 03.25.21
Advanced Configurations
Pico Remote Controls
• Supports up to 10 Pico remote controls.
• Separate favorite levels can be set for each Pico
remote control. (NOTE: The bottom button on a Pico
remote is always full OFF).
Radio Powr Savr Daylight Sensor
• Supports up to one Radio Powr Savr daylight sensor
• The Radio Powr Savr daylight sensor will affect lighting
fixtures equally.
• For multiple rows of daylighting, a separate PowPak
module must be used for each daylighting row.
Minimum Light Level Setting
• Certain applications, such as hallways, may require
that the lights never turn off. For these areas, adjust
the minimum light level option and the load will lower
to programed low-end level. Default operation lowers
to OFF.
High- and Low-End Trim
• High-end and low-end trim affect all connected
fixtures equally, and can be configured from the
PowPak module.
• Adjustable low-end trim (0% –45%). Trimmable
low-end can ensure a stable light level. Some fixtures
will flicker or drop out if trimmed too low.
• The maximum light output of connected fixtures can
be decreased down to 55% for energy savings in
over-lit spaces.
Note: The perceived light output of low-end trim may
vary between fixture manufacturers and model
numbers. For best results, do not mix different
lighting load types.
Radio Powr Savr Occupancy Sensors
• Supports up to 10 Radio Powr Savr occupancy or
vacancy sensors.
• Radio Powr Savr occupancy and vacancy sensors
control all connected ballasts or drivers.
• Pico remote controls can be used to adjust the
occupied levels of fixtures that they control from
1% to 100% (of output signal) or can make them
unaffected by occupancy events.
• Vacancy events (area becomes unoccupied) turn
all ballasts and driver models off or to minimum
light level.
Standalone (no hub) Vive app (with hub)
Pico remote controls - configurable favorite levels
√ √
Radio Powr Savr daylight sensor - control multiple daylighting
rows from one sensor
√ √
Configurable minimum light level setting
√* √
Configurable high- and low-end trim
√ √
Radio Powr Savr occupancy sensor - configurable
occupied level
√ √
* The minimum light level can be configured to either low-end or off in standalone (no hub). Additional options are
available via the Vive app (with hub).
7