Cut Sheet

®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Vive
PowPak Phase Select Wireless Lighting Control
3691150b 6 03.25.21
RMJS-PNE-DV-EM Sequence of Operation
With a Vive hub:
• Normal mode: The RMJS-PNE-DV-EM can dim loads
as normal and respond to local button presses, Pico
remote controls, occupancy sensors, daylight sensors,
timeclock events and preset scene calls.
• Emergency mode: Upon loss of power greater than
250 mS OR an override signal* from the Vive hub, the
RMJS-PNE-DV-EM will override the light output to its
emergency level (configured using the Vive hub) and
enter lockout mode. It will not respond to any local
button presses, Pico remote controls, occupancy
sensors, daylight sensors, timeclock events, or preset
scene calls.
• Return from Emergency mode to Normal mode: When
normal power is restored to the Vive hub or the override
signal* from the Vive hub is cleared, the emergency
PowPak module will return to the previous light level
between 3 and 10 minutes of normal power being
restored. It will again respond to local button presses,
Pico remote controls, occupancy sensors, daylight
sensors, timeclock events, and preset scene calls.
* Override signal triggered from the contact closure #2
on the Vive hub from one of the following inputs:
– Fire alarm control panel
– Security system
– LUT-ELI-3PH
Without a Vive hub:
• Normal mode: The RMJS-PNE-DV-EM can dim
loads as normal and respond to local button
presses, Pico remote controls, occupancy sensors,
and daylight sensors.
• Emergency mode: When the RMJS-PNE-DV-EM is
powered up after a loss of power greater than 250 mS
the RMJS-PNE-DV-EM will override the light output
to full and enter lockout mode for 90 minutes. It will
not respond to any local button presses, Pico remote
controls, occupancy sensors or daylight sensors.
• Returning from Emergency mode to Normal mode:
When normal power is restored, the emergency
PowPak module will remain in emergency mode
for 90 minutes (full output). It will then return to the
previous light level and respond to local button
presses, Pico remote controls, occupancy sensors
and daylight sensors.
6