Cut Sheet

®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Vive
PowPak Phase Select Wireless Lighting Control
3691150b 5 03.25.21
Specifications (continued)
Mounting
• This device must be fully installed into a metal
junction box using two screws. The device must be
mounted such that the backcover is inside the 4 in
x 4 in (101.6 mm x 101.6 mm) junction box and the
front faceplate is outside the 4 in x 4 in (101.6 mm x
101.6 mm) junction box. Adding an extension ring is
recommended for junction box depth extension.
• Improper installation can result in degraded wireless
communications and intermittent or sustained
communications failures and will not be covered
under warranty. For all other installations, refer to the
installation instructions and consult local and national
electric codes for proper installation.
• The front of the PowPak module needs to be
accessible for some programming steps.
Record where it is mounted so that it can be
easily located later.
• Can be mounted in any orientation.
System Communication
• Operates using Clear Connect – Type A RF
Technology for reliable wireless communication; refer
to model number chart on page 2 for frequency band
details
• Wireless sensors and controls must be located within
60 ft (18 m) line of sight, or 30 ft (9 m), through walls,
of the associated control module. The 60 ft (18 m)
range is not reduced by a ceiling tile obstruction.
Contact Lutron first for applications using foil-backed
or metallic ceiling tiles.
Environment
• Ambient operating temperature:
32°F to 104°F (0°C to 40°C)
• 0% to 90% humidity, non-condensing
• For indoor use only
Default Operation
• Associated wireless input devices control all
connected fixtures together
• Occupancy sensors:
– Occupied:100%; Unoccupied:0% (OFF)
• Pico remote controls:
– On:100%; Favorite Level:50%; OFF:0% (OFF)
• Daylight sensor: Decreases electric light in response
to additional available daylight
Key Design Features
• LED status indicator shows RF communication,
error codes, and provides programming feedback.
See App Note #781 (P/N 048781) on
www.lutron.com for more details.
• Configurable high-end and low-end trim
• 10-year power failure memory: If power is
interrupted, connected loads will return to the level
prior to interruption
• The OFF level (minimum light level) can be set in
standalone (non-hub) mode to either low-end or OFF.
Additional options available via the Vive app.
• 1 year limited warranty. The customer can register
the product to increase the warranty period from
1 year to 5 years. Please visit www.lutron.com/
TechnicalDocument Library/369-119_Wallbox_
Warranty.pdf for warranty details.
5