Cut Sheet

®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Vive
PowPak Phase Select Wireless Lighting Control
3691150b 4 03.25.21
Specifications (continued) (for both RMJS-PNE-DV and RMJS-PNE-DV-EM)
120 V~ Ratings:
Load Type Rating (maximum)
LED drivers (reverse-phase) 450 VA
F
LED bulbs, self-ballasted lamps (reverse-phase) 450 VA
F, G
Lutron Hi-lume 1% 2-wire LED driver
A
3 A (13 drivers max)
LED NEMA SSL 7A-2015 (forward-phase)
B, H
200 W
Incandescent / halogen 450 W
ELV (reverse-phase) 450 W
Fluorescent (forward-phase) 400 VA
F
Neon / Cold Cathode, MLV
C ,D
400 VA
F
(320 W)
E
A
Load type must be set to forward-phase with low-end trim = 32% and high-end trim = 78%.
Setting the proper trim and load type is necessary to ensure optimal performance and
1% dimming capability.
B
Complies with NEMA SSL 7A-2015 when configured in Vive UI application to LED
forward-phase with low-end trim set to 12% and high-end trim set to 90%.
C
MLV is forward-phase only.
D
Only use iron / steel (core and coil, magnetic) transformers intended for use with an
electronic switch or dimmer
E
Actual lamp wattage.
F
Rating based upon input to the converter (MLV transformer, LED driver, or fluorescent
ballast). Actual lamp wattage will be less depending on efficiency of the converter.
Contact manufacturer or consult data sheets for values.
G
RMS current should not exceed 3.75 A.
H
See https://www.lutron.com/TechnicalDocumentLibrary/048637.pdf for more information.
Dimming LEDs in forward-phase have reduced ratings compared to reverse-phase due to
higher peak currents.
277 V~ Ratings:
Load Type Rating (maximum)
LED drivers and self-ballasted lamps (reverse-phase) 450 VA
F
Incandescent / halogen 450 W
ELV (reverse-phase) 450 W
Fluorescent (forward-phase) 400 VA
F
Neon / Cold Cathode, MLV
C ,D
400 VA
F
(320 W)
E
Installation
Note: 4 in x 4 in (101.6 mm x 101.6 mm)
junction box not provided by Lutron.
Shown here with fully installed product.
Note: Power wires (Black and
Red) are 14 AWG (2.5 mm
2
).
White is 16 AWG (1.5 mm
2
)*.
* Device is grounded via screw terminal
Note: Must use metal junction box, minimum depth
2.125 in (53.95 mm). Adding an extension ring is
recommended for junction box depth extension.
See App Note # 781 (P/N 048781) on www.lutron.com
for additional information.
4