Cut Sheet
Table Of Contents
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Vive PowPak Relay Module with Softswitch Wireless Lighting Control
369908f 3 03.12.18
Specifications
Regulatory Approvals
• UL
® Listed (U.S.A.)
• UL 924 Listed (RMJS-16R-DV-B-EM only)
• FCC approved. Complies with the limits for a Class B
device, pursuant to Part 15 of the FCC rules. (U.S.A.)
• Complies with requirements for use in other spaces
used for environmental air (plenums) per
NEC
® 2014 300.22(C)(3)
• Listed in accordance to CAN/ULC S102.2-2010 with
a Flame Spread Rating of 0 and a Smoke Developed
Classification of 40, with a minimum spacing of 6 ft
(1.83 m) off center
• CSA and IC (Canada) (RMJS- only)
• COFETEL (Mexico) (RMJS- only)
• NOM (Mexico) (RMJS- only)
Power
• Operating voltage: 120 / 277 V~ 50/60 Hz
• Standby Power Consumption (all models): < 1.0 W
System Communication
• Operates using Clear Connect RF Technology for reliable
wireless communication; refer to model number chart on
page 2 for band frequency details
• RF range is 30 ft (9 m)
• Wireless sensors and controls must be located within
60ft (18 m) line of sight, or 30 ft (9 m), through walls, of
the associated control module. The 60 ft (18 m) range is
not reduced by a ceiling tile obstruction.
• Contact Lutron first for applications using foil-backed or
metallic ceiling tiles.
Environment
• Ambient operating temperature: 32 °F to 131 °F
(0 °C to 55 °C)
• 0% to 90% humidity, non-condensing
• For indoor use only
• All drivers and ballasts used with Vive wireless
controls must comply with the limits for a Class A
device pursuant to Part 15 of the FCC Rules
Load
• -16R models: 16 A; -5R models: 5 A;
RMJS-16R models: No minimum load requirements.
• Load types include (but are not limited to):
Incandescent, MLV, ELV, Resistive, Inductive,
Magnetic fluorescent, Electronic fluorescent
• Motor rating:
RMJS-16R- and URMJS-16R- models:
1/2 HP (120 V~), 1
1
⁄2 HP (277 V~)
RMJS-5R- and URMJS-5R- models: 1/6 HP (120 V~),
1/3 HP (277 V~)
Softswitch
• Patented Softswitch circuit eliminates relay arcing at
mechanical contacts
• Extends relay life to an average of 1 million cycles
• Output is non-latching
Key Design Features
• LED status indicator shows current load status and
provides programming feedback
• Power failure memory: If power is interrupted,
connected loads will return to the previous level prior
to interruption
(continued on next page . . .)
3