Cut Sheet

SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Pico® PX Series Wired Control
369439d 1 08.21.12
PicoR Wired Control
The PicoR Wired control works with compatible
LutronR systems to control a light or group of lights.
The PicoR Wired control is easily wired to the system
via IEC PELV / NECR Class 2 wiring.
Features
•
Provides control for the following LutronR products
that incorporate a wired IR input:
- Energi Savr NodeT units
- QS Sensor Modules
- EcoSystemR ballasts or ballast modules
•
Mounts easily in any single-gang wallbox (sold separately)
•
Fits designer style ClaroR wallplates (sold separately)
•
Allows users to:
—
Turn On / Off individual fixture or group of fixtures
—
Raise / Lower light levels (-2BRL and -3BRL)
—
Recall favorite light levels (-3B and -3BRL)
•
IEC PELV / NECR Class 2 wiring
Model Numbers
PX-2B-GXX*-I01 2 Buttons
PX-2BRL-GXX*-I01 2 Buttons with Raise/Lower
PX-3B-GXX*-I01 3 Buttons (including Preset)
PX-3BRL-GXX*-I01 3 Buttons (including Preset)
with Raise/Lower
* “XX” in the model number represents color code.
PX-2BRL-GWH-I01
Shown actual size with ClaroR wallplate
(sold separately)
White
WH
Black
BL
Ivory
IV
White / Gray
WG
Light Almond
LA
Notes:
•
All models available in gloss finish only.
•
For White/Gray (WG), top and raise buttons are white; preset, lower, and bottom buttons are Gray.
Color and Finishes
PX-3BRL-GWH-I01 PX-3B-GWH-I01 PX-2B-GWH-I01
Models shown in White (WH)
1