Cut Sheet

ManualsBrandsLutron ManualsElectricalCaseta Motion Sensor Vacancy-Only, Works with Alexa and the Google Assistant White

Table Of Contents

Copy of pdfformfields_file_11pages

Ceiling

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Radio Powr Savr Wireless Occupancy/Vacancy Sensor

369480j 1 04.23.20

Radio Powr Savr Wireless

Occupancy / Vacancy Ceiling Sensor

Lutron Radio Powr Savr occupancy / vacancy sensors are

wireless, battery-powered, passive infrared (PIR) sensors

that automatically control lights via RF communication to

compatible dimming and switching devices. These

sensors detect the heat (IR radiation of 9.5μm) from

people moving within an area to determine when the

space is occupied. The sensors then wirelessly transmit

the appropriate commands to the associated dimming

and switching devices to turn the lights on or off

automatically. They combine both convenience and

exceptional energy savings potential along with ease of

installation.

Features

• Wireless occupancy sensor has 3 settings available:

Auto-On / Auto-Off, Auto-On Low-Light / Auto-Off, and

Manual-On / Auto-Off

• Auto-On Low-Light feature will turn lights on automatically

only if there is less than approximately 10Lux (1fc) of

ambient light

• Vacancy-only model available to meet California (U.S.A.)

Title 24 requirements

• Uses Clear Connect technology

• Passive infrared motion detection with exclusive Lutron

XCT Technology for fine motion detection

• 360˚ coverage ranges from 324 ft

(30.2 m

) to 676 ft

(62.4 m

), depending on mounting height

• Simple and intuitive adjustments available for Timeout,

Auto-On, and Activity settings

• Supports advanced occupancy features, such as

dependent occupancy groups and customizable

occupied / unoccupied presets in some systems

• Multiple sensors can be added for extended coverage.

Refer to product specification submittal of receiving device

to determine system limits

• Lens illuminates during test mode to verify ideal locations

• Multiple ceiling-mount methods available for different

ceiling materials

• Front accessible test buttons make programming easy

• 10-year battery life design

• RoHS compliant

Models Available

• LRF -OCR2B-P-WH

Color Code

Occupancy and Vacancy

Frequency / Channel Code

• LRF2-VCR2B-P-WH

Vacancy Only

Available for Channel Code 2 Only

Frequency / Channel Codes

Available

2 = 431.0 – 437.0 MHz (U.S.A., Canada, Mexico, Brazil)

3 = 868.125 – 869.850 MHz (Europe, U.A.E.)

4 = 868.125 – 868.4755 MHz (China, Singapore)

5 = 865.5 – 866.5 MHz (India)

6 = 312.3 – 314.8 MHz (Japan)

7 = 433.05 – 434.79 MHz (Hong Kong, Macau)

Color Code

WH = White

Compatible RF Devices

• For use with Lutron products only

• Supports simultaneous association with multiple Lutron

Clear Connect devices and / or systems*

* Contact Lutron Customer Service at www.lutron.com/support for

frequency / channel code compatibility with your particular

geographic region, and for integrating with other Lutron lighting

and shading products.

Summary of content (6 pages)

PAGE 1
Radio Powr Savr Ceiling Wireless Occupancy/Vacancy Sensor 369480j 1 04.23.20 Radio Powr Savr Wireless Occupancy / Vacancy Ceiling Sensor Lutron Radio Powr Savr occupancy / vacancy sensors are wireless, battery-powered, passive infrared (PIR) sensors that automatically control lights via RF communication to compatible dimming and switching devices. These sensors detect the heat (IR radiation of 9.5 μm) from people moving within an area to determine when the space is occupied.
PAGE 2
Radio Powr Savr Ceiling Wireless Occupancy/Vacancy Sensor 369480j 2 04.23.20 Specifications RF Range Regulatory • Lutron Quality Systems Registered to ISO 9001:2008 LRF2-, LRF3-, LRF4-, LRF5-, LRF7Local load controls must be located within 60 ft (18 m) line-of-sight, or 30 ft (9 m) through walls, of a sensor. Regulatory Approvals LRF2- (USA and Canada) cULus Listed FCC certified IC certified Meets CA (U.S.A.
PAGE 3
Radio Powr Savr Ceiling Wireless Occupancy/Vacancy Sensor 369480j 3 04.23.20 Installation Overview Mounting Sensor Setup Temporary mounting is optional to test sensor coverage and wireless communication before permanently installing the sensor. • Sensor setup is available as a service by Lutron. For more information see the Sensor Layout and Tuning service document (Lutron P/N 3601235). Sensor Placement • To detect motion, the sensor requires line-of-sight of room occupants.
PAGE 4
Radio Powr Savr Ceiling Wireless Occupancy/Vacancy Sensor 369480j 4 04.23.20 Dimensions 3.57 in (90.7 mm) 2.85 in (72.4 mm) 0.88 in (22.5 mm) 1.13 in (28.
PAGE 5
Radio Powr Savr Ceiling Wireless Occupancy/Vacancy Sensor 369480j 5 04.23.20 Coverage Diagrams Per NEMA WD7 test method Ceiling 8 ft (2.4 m) Floor 15 ft 12 ft 9 ft 6 ft 3 ft (4.6 m) (3.7 m) (2.7 m) (1.8 m) (0.9 m) 0 3 ft 6 ft 9 ft 12 ft 15 ft (0.9 m) (1.8 m) (2.7 m) (3.7 m) (4.6 m) 18 ft × 18 ft (5.5 m × 5.5 m) maximum square coverage area when mounted on an 8 ft (2.4 m) ceiling Sensor 13 ft (4.0 m) radius of coverage at floor when mounted on an 8 ft (2.
PAGE 6
Radio Powr Savr Ceiling Wireless Occupancy/Vacancy Sensor 369480j 6 04.23.20 Lens Masking Whenever possible, the sensor should be installed in a location where it cannot view areas outside the intended space, such as hallways or adjacent rooms. If this situation cannot be avoided, portions of the lens may be masked to block the view of the sensor into undesired areas. Ten (10) PIR Lens Masks may be purchased in the kit, L-CMDPIRKIT.