Specification Sheet

PD-5WS-DV, PD-6ANS
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Caséta® Wireless In-Wall Switch
369831c 3 10.28/15
Specifications
Regulatory Approvals
• cULus Listed
• NOM Certified
• FCC Approved. Complies with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules
• Industry Canada Certified
• IFTEL Certified
• NEMA 410
Power
Operating voltage:
• PD-5WS-DV: 120 / 277 V~ 50 / 60 Hz
• PD-6ANS: 120 V~ 50 / 60 Hz
Key Design Features
• Tested to withstand electrostatic discharge without
damage or memory loss, in accordance with
IEC 61000-4-2.
• Tested to withstand surge voltages without damage
or loss of operation, in accordance with IEEE
C62.41-1991 Recommended Practice on Surge
Voltages in Low-Voltage AC Power Circuits.
• Switches always operate locally and do not require
system control.
• Power failure memory: should power be interrupted,
the control will return to its previously set level prior
to the interruption when power is restored.
• Uses conventional 3-way wiring.
• Uses LutronR ClaroR wallplates or designer-style
wallplates from other manufacturers. Wallplates are
sold separately.
• LutronR ClaroR wallplates snap on with no visible
means of attachment.
• Requires a 1-gang U.S. wallbox. 3
1
⁄2 in (89 mm)
depth recommended, 2
1
⁄4 in (57 mm) depth
minimum.
• Green status LED.
System Communications and Capacity
• The CasétaR Wireless In-Wall Switch communicates
with PicoR remote controls and the LutronR Smart
Bridge/Smart Bridge PRO through radio frequency
(RF).
• The CasétaR Wireless In-Wall Switch communicates
with LutronR Radio Powr SavrT
Occupancy and
Vacancy
Sensors in a standalone application.
Sensors do not work with Smart Bridge or Smart
Bridge PRO.
• The CasétaR Wireless In-Wall Switch must be located
within 60ft (18m) line-of-sight or 30ft (9m) through
walls, of PicoR remote controls and LutronR Smart
Bridge devices.
Device limits
• PicoR remote controls and Radio Powr SavrT
occupancy sensors: up to 10devices (total) may be
paired to each CasétaR Wireless In-Wall Switch (with
no Smart Bridge installed)
• Smart Bridge or Smart Bridge PRO system: up to
50total wireless devices (CasétaR Wireless dimmers/
switches, PicoR remote controls) are supported per
system. Smart Bridge or Smart Bridge PRO counts
as one device.
Environment
• Ambient operating temperature: 32°F to 104°F
(0°C to 40°C), 0% – 90% humidity, non-condensing.
Indoor use only.
3