Instructions / Assembly

Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
369804c 2 06.19.14
PD-6WCLCasétaT Wireless In-Wall Dimmer
Specifications
Regulatory Approvals
• cULus Listed
• NOM certified
• FCC Approved. Complies with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules
• Industry Canada certified
• COFETEL certified
Power
Operating voltage:
120 V~ 50/60 Hz
Key Design Features*
• Tested to withstand electrostatic discharge without
damage or memory loss, in accordance with
IEC 61000-4-2.
• Tested to withstand surge voltages without damage or
loss of operation, in accordance with
IEEE C62.41-1991 Recommended Practice on Surge
Voltages in Low-Voltage AC Power Circuits.
• Dimmers always operate locally and do not require
system control.
• Power failure memory: should power be interrupted,
the control will return to its previously set level prior to
the interruption when power is restored.
• Uses LutronR ClaroR wallplates or designer-style
wallplates from other manufacturers. Wallplates are
sold separately.
• LutronR ClaroR wallplates snap on with no visible
means of attachment.
• Requires a 1-gang U.S. wallbox. 3
1
⁄2 in (89 mm) deep
recommended, 2
1
⁄4 in (57 mm) deep minimum.
• Green LEDs indicate load status.
System Communications and Capacity
• The CasétaT Wireless in-wall dimmer communicates
with the PicoR remote controls and Radio Powr
SavrT sensors through radio frequency (RF).
• The CasétaT Wireless in-wall dimmer must be
located within 60 ft (18 m) line-of-sight or 30 ft (9 m)
through walls, of PicoR remote controls and Radio
Powr SavrT sensors.
• Up to ten transmitting devices may be associated to
each in-wall dimmer.
Environment
• Ambient operating temperature: 32 °F to 104 °F
(0 °C to 40 °C), 0%-90% humidity, non-condensing.
Indoor use only.
* For advanced features, tips on how to use CasétaTM Wireless dimmers with CFLs and LEDs, the complete CasétaTM Wireless product line, and
more, please visit www.casetawireless.com/features
2