Cut Sheet

5
DERATING/MAXIMUM CAPACITY
No side One side Two side
sections section sections
removed removed removed
(Full Capacity) (End Units) (Middle Unit)
Incandescent Dimmers
600W 500W 300W
1000W 900W 700W
1500W 1250W 1000W
1950W
1 ____ ____
Electronic Low Voltage
300W
2
300W
2
250W
2
600W
2
500W
2
400W
2
Magnetic Low Voltage
600VA 500VA 300VA
(450W
2
) (400W
2
) (250W
2
)
1000VA 900VA 700VA
(800W
2
) (750W
2
) (500W
2
)
1500VA 1250VA 1000VA
(1200W
2
) (1000W
2
) (800W
2
)
Fluorescent Hi-lume/Eco-10
6A No Derating Required
8A No Derating Required
16A No Derating Required
Fluorescent Tu-Wire
5A 4A 3.3A
Fluorescent Dimming with Eco-10
(TVE-Series) 0-10VDC Electronic Ballasts
60 ballasts / 16A No Derating Required
Quiet Fan-Speed Controls
1.5A No Derating Required
Fully Variable Fan-Speed Controls
6A 4.2A 2.5A
12A 10A 8.3A
1 Control must be ganged without removing side sections.
The NT-2000- does not have side sections that are removable.
2 Actual lamp wattage.
Description Model #
STANDARD MULTIGANG WALLPLATES
Single-gang wallplate is provided with Nova TA product.
2-Gang
F OR TWO DIMMERS OR SWITCHES
4.56”W (116mm) x 4.56”H (116mm) VWP-2-
F OR TWO RECEPTACLES OR JACKS
4.56”W (116mm) x 4.56”H (116mm) VWP-2R-
F OR ONE DIMMER OR SWITCH AND ONE RECEPTACLE OR JACK
4.56”W (116mm) x 4.56”H (116mm) VWP-2CR-
F OR ONE RECEPTACLE OR JACK AND ONE DIMMER OR SWITCH
4.56”W (116mm) x 4.56”H (116mm) VWP-2RC-
3-Gang
F OR THREE DIMMERS OR SWITCHES
6.32”W (161mm) x 4.56”H (116mm) VWP-3-
4-Gang
F OR FOUR DIMMERS OR SWITCHES
8.45”W (215mm) x 4.56”H (116mm) VWP-4-
STANDARD COLORS/FINISHES
Matte Finishes (Ships in 3-5 days)
Add color/finish suffix to model number to order. Example: NT-600-WH
WH White BE Beige IV Ivory AL Almond
LA Light Almond GR Gray TP Taupe SI Sienna
BR Brown BL Black
SPECIAL ORDER
MULTIGANG AND METAL WALLPLATES
When ordering product for use with metal wallplates, the product and wallplate
must be ordered separately. See the Nova Ta/Nova Wallplate Ordering Guide in
the Lutron Residential Lighting Controls Catalog (360-975) for ordering procedure.
See below for complete list of metal finishes.
Metal Finishes (Ships in 4-6 weeks)
SB Satin Brass BB Bright Brass BC Bright Chrome
Special Metal Finishes
QB Antique Brass QZ Antique Bronze SC Satin Chrome
SN Satin Nickel BN Bright Nickel
Anodized Aluminum Finishes
CLA Clear BLA Black BRA Brass
CUSTOM COLOR MATCHING
Custom color matching is available for all Nova Ta products. A swatch or sample
is all that is required. Call customer service to arrange for a color-matched control.
ENGRAVED CONTROLS AND WALLPLATES
Engraving is available for all Nova Ta products. Engraving schedules are
available in the Lutron Residential Lighting Controls Catalog (360-975) or through
Customer Service 888-588-7661.
Have Questions? Call the Lutron Hotline [phone]
To order—Call Lutron Customer Service 888-588-7661
Controls