Cut Sheet

2
Maximum
Description Capacity
1
Model #
DIMMERS
Incandescent
Slide-to-Off Dimmers
S MALL C ONTROL
Single pole 600W NT-600-
Single pole 1000W NT-1000-
L ARGE C ONTROL
Single pole 1500W NT-1500-
Single pole 1950W NT-2000-
Note: The NT-2000- does not have side sections that are
removable and must be ganged with no fins removed.
Preset Dimmers
S MALL C ONTROL
Single pole/3-way 600W NT-603P-
Single pole/3-way 1000W NT-1003P-
L ARGE C ONTROL
Single pole/3-way 1500W NT-1503P-
Note: For 3-way and 4-way switching use NT-3PS-
and NT-4PS- or other mechanical switches.
OmnislideTM Two-location Dimmers
For two-location dimming, use one Base Unit
(NTB-600-, NTB-1000-) with one Auxiliary Unit (NTA-2-)
Base Unit 600W NTB-600-
Base Unit 1000W NTB-1000-
Auxiliary Unit (Use with Base Unit)
2
NTA-2-
Electronic Low Voltage
Slide-to-Off Dimmers
4
S MALL C ONTROL
Single pole 300W
3
NTELV-300-
Single pole 600W
3
NTELV-600-
Note: Requires neutral wire connection. For electronic
low voltage loads up to 1000W, use Nova TA fluorescent
dimmers (NTF-10- or NTF-103P-) with an ELVI-1000 interface.
1 For capacities in multigang installations see derating.
2 No derating required if ganged.
3 Actual lamp wattage.
4 Requires neutral wire connection.
5 To determine the number of ballasts that can be controlled by Nova Ta
fluorescent dimmer, divide the control capacity by the ballast current. For a
complete list of Lutron ballasts and ballast currents, see the Fluorescent
Dimming System Selection Guide (366-002).
Maximum
Description Capacity
1
Model #
DIMMERS
Magnetic Low Voltage
Slide-to-Off Dimmers
S MALL C ONTROL
Single pole, 120V 600VA (450W
3
) NTLV-600-
Single pole, 277V
4
600VA (450W
3
) NTLV-600-277-
Single pole, 120V 1000VA (800W
3
) NTLV-1000-
Single pole, 277V
4
1000VA (800W
3
) NTLV-1000-277-
L ARGE C ONTROL
Single pole 1500VA (1200W
3
) NTLV-1500-
Preset Dimmers
S MALL C ONTROL
Single pole/3-way 600VA (450W
3
) NTLV-603P-
Single pole/3-way 1000VA (800W
3
) NTLV-1003P-
L ARGE C ONTROL
Single pole/3-way 1500VA (1200W
3
) NTLV-1503P-
For 3-way and 4-way switching use NT-3PS- and NT-4PS-
or other mechanical switches.
Fluorescent Dimming with Hi-lume® and
Eco-10TM (ECO-Series) Electronic Ballasts
Slide-to-Off Dimmers
2, 5
S MALL C ONTROL
Single pole, 120V 16A NTF-10-
Single pole, 277V 8A NTF-10-277-
Note: Use with Lutron Hi-lume or Eco-10 (ECO-Series) line
voltage control Electronic Dimming Ballasts only.
Preset Dimmers
2, 5
S MALL C ONTROL
Single pole/3-way, 120V 8A NTF-103P-
Single pole/3-way, 277V 6A NTF-103P-277-
Note: Use with Lutron Hi-lume or Eco-10 (ECO-Series) line
voltage control Electronic Dimming Ballasts only. For 3-way
and 4-way switching use NT-3PS- and NT-4PS- or other
mechanical switches.
Fluorescent Dimming with Eco-10
(TVE-Series) 0-10VDC Electronic Ballasts
Slide-to-Off Dimmers
2
S MALL C ONTROL
Single pole, 0-10VDC 60 ballasts/16A NTFTV-
Use with PP-20.
Note: Use with Lutron Eco-10 (TVE-Series) 0-10VDC Electronic
Dimming Ballasts only. Requires use of an external relay to
switch ballast power on/off, Lutron model number PP-20.
Fluorescent Dimming with Tu-Wire
TM
Electronic Ballasts
Slide-to-Off Dimmers
S MALL C ONTROL
Single pole, 120V 5A NTFTU-5A-
Note: Use with Lutron Tu-Wire line voltage control Electronic
Dimming Ballasts only.
Have Questions? Call the Lutron Hotline [phone]
To order—Call Lutron Customer Service 888-588-7661
Controls
PP-20