Cut Sheet

ManualsBrandsLutron ManualsCommercial Grade SwitchesLinear-Slide Switch, 20A, Taupe

The classic thin-proﬁle

linear-slide dimmer.

PRODUCT FAMILY FEATURES

• Classic linear-slide dimmer with thin proﬁle design

• Excellent for residential or commercial applications

• Intuitive operation–easy to use

• Slide-to-off and preset models available

• Enclosed heat sink for aesthetically pleasing appearance

• Multigang alignment for quick and easy installation

• Full family of products for most lighting sources, plus matching

accessories and wallplates

• Now available for 277V Magnetic Low Voltage in 600VA and

1000VA ratings

• Metal, custom multi-gang and engraved wallplates available

DIMENSIONS

Small Control Large Control Proﬁle

SPECIFICATION SUB MITTA L

CONTROLS AND ACCESSORIES

Slide-to-Off Dimmers Preset Dimmers

Have Questions? Call the Lutron Hotline 800-523-9466

To order—Call Lutron Customer Service 888-588-7661

DELLORTNOC AERAEMAN BOJ

REBMUN BOJNOITACOL

.ON EGAPELTIT

SPECIFICATION SERIES

STANDARD FEATURES

• Square Law Dimming • Voltage compensation

• Power-failure memory • Superior RFI suppression

• Captive linear slider • Accessible air-gap switch

• Electrostatic discharge tested • Precise color matching

• Heavy-duty components for surge protection and long product life

Lutron controls are rated at 120VAC, 60Hz unless otherwise noted.

Controls

www.lutron.com/novat

Select

light level

with slider;

slide down

to off

Select

light level

with slider;

press on/off

Slide-to-off

Dimmer

Preset

Dimmer

(Small Control) (Large Control) (Small Control) (Large Control)

15A 20A

Isolated Ground

Receptacles

Cable TV

Jack

Single Double Triple

Telephone Jack

15A 20A

Receptacles

15A 20A

GFCI Receptacles

15A 20A

Duplex for

Dimming Use

15A 20A

Half for

Dimming Use

(Small Control) (Large Control)

Two Location Dimming System Switch

Telephone /

Cable TV

Jack

Slide-to-Off Fan-Speed Controls

Omnislide Dimmers Linear-Slide Switches

Receptacles/Plugs

Telephone/Cable TV Jacks/Ports

6-Port

Frame

10A Replacement

Plug for Dimming Use

2-gang, 3-gang and 4-gang for dimmers/switches

2-gang for a dimmer or switch and a receptacle or jack

Standard Multigang Wallplates

Summary of content (13 pages)

PAGE 1
S P E C I F I C AT I O N S U B M I T TA L Controls www.lutron.com/novat CONTROLS AND ACCESSORIES The classic thin-profile linear-slide dimmer.
PAGE 2
Controls Description Maximum Capacity 1 Model # Maximum Capacity 1 Description DIMMERS Model # DIMMERS Incandescent Magnetic Low Voltage Slide-to-Off Dimmers Slide-to-Off Dimmers SMALL CONTROL Single pole Single pole 600W 1000W NT-600NT-1000- LARGE CONTROL Single pole Single pole 1500W 1950W NT-1500NT-2000- Note: The NT-2000- does not have side sections that are removable and must be ganged with no fins removed.
PAGE 3
Controls Maximum Capacity 1 Description Model # Description HI-POWER 2•4•6 DIMMING MODULES Maximum Capacity 1 ACCESSORIES TM Receptacles To increase load capacity up to 30,000W/VA in most popular sources, use one NT-600- or NT-603P- and add up to five dimming modules. Cannot be used with 0-10VDC ballast.
PAGE 4
Controls Description Rating Model # ACCESSORIES Field Customizable Multi-Port Frame 6-Port Frame Shipped with 6 blanks NT-6PFShown with blanks Product above: For use with Lutron connectors shown below. Also compatible with Hubble XceleratorTM and snap-fit connectors. Connectors For use with 6-port frame (NT-6PF-). Each connector fills one port.
PAGE 5
Controls Description Model # STANDARD MULTIGANG WALLPLATES DERATING/MAXIMUM CAPACITY Single-gang wallplate is provided with Nova TA product. 2-Gang FOR TWO DIMMERS OR SWITCHES 4.56”W (116mm) x 4.56”H (116mm) VWP-2- FOR TWO RECEPTACLES OR JACKS 4.56”W (116mm) x 4.56”H (116mm) No side sections removed (Full Capacity) VWP-2R- Incandescent Dimmers 600W 1000W 1500W 1950W 1 FOR ONE DIMMER OR SWITCH AND ONE RECEPTACLE OR JACK 4.56”W (116mm) x 4.
PAGE 6
Controls WIRING DIAGRAMS Wiring Diagram 1 Single-Pole Wiring Dimmer/ Switch/Fan-Speed Control Black * Black or Red * Hot 120VAC 60Hz Green ** Neutral NT-1PSNT-600NT-1000NT-1500NT-2000NTFSQLighting NTFTU-5ALoad or Fan NTLV-600NTLV-1000NTLV-1500- Fan-Speed Control Black Red Hot 120VAC 60Hz Yellow (Cap off) * Green Fan Neutral ** or Brass screw terminal ** or Green screw terminal Wire Connectors Wiring Diagram 2 Single-Pole Wiring of 3-Way Control Dimmer/ Switch/Fan-Speed Control Red ** Black *
PAGE 7
Controls WIRING DIAGRAMS Wiring Diagram 6 Two Location Wiring Base Control Line Side Hot Base Control Load Side Base Dimmer Black 120VAC 60Hz Model # Auxiliary Dimmer Red Black Auxiliary Dimmer Red Red Blue Orange Green Black Ground Hot Base Dimmer Red Wire Connectors NTA-2NTB-600NTB-1000- Black Orange Blue OR 120VAC 60Hz Green Green Green Lighting Load Lighting Load Neutral Neutral Wiring Diagram 7 3-Way Wiring Model # Fan-Speed Control or 3-Way 3-Way Dimmer/Switch Switch ** Black
PAGE 8
Controls WIRING DIAGRAMS Wiring Diagram 9 Cable TV Jack Wiring Wiring Diagram 13 GFCI Receptacle Wiring Model # Model # NT-CJ- 75-Ohm Cable NTR-15-GFCINTR-20-GFCI- 75-Ohm Cable Cable TV Jack Ground Green or Screw Terminal Neutral White Green or Screw Terminal Green or Screw Terminal White NP NP P P P P 120VAC 60Hz Wiring Diagram 10 Telephone Jack Wiring Model # 1 Wire Jack Position Color 1 White 2 Black 3 Red 4 Green 6-Conductor Yellow Telephone Jack* 5 6 Blue *accepts most 4-conduc
PAGE 9
Controls WIRING DIAGRAMS Wiring Diagram 16 Single-Pole Wiring Model # Dimmer Black Hot 120VAC or 277VAC 60Hz Ground Red Black Yellow or Orange Orange or Brown * Wire Connectors Typical 4-Wire Connection Dimming Ballast White ** White Green NTF-10NTF-10-277- Black Orange or Brown * Dimming Ballast White ** Neutral *** or Yellow/Blue or *** Yellow/Green when *** used with magnetic *** dimming ballasts *** must use lamp *** disconnect sockets *** with magnetic dimming ballasts To Additional Bal
PAGE 10
Controls WIRING DIAGRAMS Wiring Diagram 19 Dimming with ON/OFF Control Using PP-20 Relay Neutral 120/277VAC 60Hz Black Hot Model # NTFTV- White Blue *** White Black (120VAC) * Orange (277VAC) ** Blue *** Black Lutron Power Pack Red Black Blue Blue Violet (+) Grey (-) White Black Violet (+) Grey (-) Class 2 Wiring #20 AWG White Black Violet (+) Grey (-) Red (Cap off) 0-10 VDC Wall Control Ground To Additional Ballasts (60 Maximum) 0-10VDC Dimming Ballast 0-10VDC Dimming Ballast 0-10VDC Contro
PAGE 11
Controls c. Controls shall provide a vertical slider allowing the light level or fan speed to be set by the user. "Slide-to-off" controls shall use the vertical slider to turn the control on and off. "Preset" dimmers shall provide the on/off function independent of the dimmer slider position. This preset function shall be provided as a push on/push off switch integral to the slider knob and visibly distinct from the slider.
PAGE 12
Controls s. 2. 3. 4. 5. 3-Way controls shall wire using conventional 3-way and 4-way wire runs. t. Contractors shall install all backboxes with a minimum wallbox depth of 2.5 inches. Incandescent Dimmers a. Provide incandescent dimmers for direct control of up to a full 20A lighting circuit, which is derated by 20% to 16 Amps per the NEC. b. Dimmers shall have a high-end of no less than 95% of line voltage. c. Dimmer shall be capable of operating in either 3-way switch location.
PAGE 13
Controls c. Eight-conductor telephone jacks shall be Category 5 Voice and Data rated. They shall be FCC Part 68, Sub-part F compliant. d. Cable TV jacks shall be the coaxial type, designed for use with standard 75-Ohm cables. e. Category 5 voice, data, or cable configurations shall be available in single gang, up to three functions per gang. C. Wallplates Lutron Nova Ta Style 1.