Cut Sheet

®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro® Occupancy/Vacancy Sensor with C•L Dimmer Sensor
369748a 5 01.11.13
Mounting
Wallbox
MaestroR
Occupancy
Sensor C•LR
Dimmer
Wallplate
Adapter
Adapter
Mounting
Screws
Wallplate
Mounting
Screws
Wallplate / Adapter purchased
separately.
Operation
Status LEDs
Indicate light level; glow softly as night
light when light is off
Sensor
LED *
Dimming Rocker
Press to brighten
Press to dim
Tapswitch
Tap on / off;
Double-tap - lights go to full on
Sensor Lens
FASST
Front
Accessible
Service
Switch
IMPORTANT NOTICE:
FASST - Front Accessible Service Switch - to service load, remove power by pulling the FASST switch out completely
on either the sensor dimmer or companion dimmer. After servicing load, push the FASST switch back in fully to restore
power to the control. Once power has been restored, the sensing dimmer can be manually turned on or off but will not
automatically control the load for the first 2 minutes.
NOTE:
*
LED only pulses to acknowledge motion when there is
motion AND the load is ON.
5