Cut Sheet

55
www.lutron.com | 1.800.523.9466 |
Switch model numbers
Timers
Countdown timer control switch
(5–60 minutes/full on)**
Single-pole, no neutral required MA-T51-CC
1
120 V 600 W/VA (5 A) on/off lighting load
(incandescent/halogen, MLV)
OR 3 A general purpose fan(s)
Multi-location/single-pole* MA-T51MN-CC
1
120 V 600 W/VA (5 A) on/off lighting load
(incandescent/halogen, MLV, ELV, fluorescent)
OR 3 A general purpose fan(s)
Use MA-T51MN- with a companion
switch (MA-AS- or MSC-AS-) for
multi-location switching.
Countdown eco-timer control switch
(30 minutes/full on)**
Single-pole MA-T530G-EE
2
120 V 600 W/VA (5 A) on/off lighting load
(incandescent/halogen, MLV)
OR 3 A general purpose fan(s)
Timer model numbers
All models must be derated if ganged unless
otherwise noted, see pg. 170.
*Requires neutral wire connection.
**Minimum load is 40 W/VA.
Switches
Digital switches
Multi-location/single-pole* MA-S8AM-CC
3
120 V 8 A light or 3 A fan
Multi-location/single-pole* MSC-S8AM-CC
4
120 V 8 A light or 3 A fan
Rated for: incandescent/halogen, magnetic
low-voltage, electronic low-voltage, non-dim
fluorescent ballasts, general purpose fans and
most non-dim LED drivers.
Multi-location/single-pole* MSCF-S6AM-277-CC
4
277 V 6 A light
Multi-location/single-pole* MAF-S6AM-277-CC
3
277 V 6 A light
Rated for: incandescent/halogen, magnetic
low-voltage, electronic low-voltage, non-dim
fluorescent ballasts and most non-dim
LED drivers.
Maestro® dimmers, sensors, timers and fan controls
Designer
wallplate opening
CC
1
: Gloss and Satin color codes, see pg. 47
CC
3
: Gloss color codes, see pg. 47
CC
4
: Satin color codes, see pg. 47
EE
2
: Available in White (WH), Ivory (IV),
Almond (AL) and Light Almond (LA)
(Wallplates not included with above, order
separately, see pg. 160)