Cut Sheet

RF Local Controls
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro Wireless Designer-style: Maestro
369143o 7 01.06.17
Specifications
Regulatory Approvals
• UL
® Listed.
• cUL Listed (MRF2-6CL only).
• CSA Certified (except for MRF2-6CL).
• FCC Approved. Complies with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
• Industry Canada Certified.
Power
Operating voltage:
• 120 V~ 50/60 Hz (all models)
• 277 V~ 50/60 Hz (MRF2-8S-DV, MRF2-F6AN-DV)
Key Design Features
Dimmers
• On a single-tap, lights fade UP or DOWN.
• On a double-tap, lights go to full ON.
• When ON, press and hold to engage 20-second fade
to OFF.
• Light levels can be fine-tuned by pressing and
holding the dimming rocker until the desired light
level is reached.
• Two-wire dimmers available.
Switches
• On a single-tap, lights turn ON or OFF.
• Two-wire switches available.
All RF Local Controls
• Tested to withstand electrostatic discharge without
damage or memory loss, in accordance with IEC
61000-4-2.
• Tested to withstand surge voltages without damage
or loss of operation, in accordance with IEEE
C62.41-1991 Recommended Practice on Surge
Voltages in Low-Voltage AC Power Circuits.
• Controls always operate locally and do not require
system control.
• Power failure memory: should power be interrupted,
the control will return to its previously-set level prior
to the interruption when power is restored.
• Uses conventional 3-way and 4-way wiring.
• Multiple location control from Dimmer/Switch and up
to nine Companion Dimmers/Switches.
• Use Lutron Designer (Claro and Satin Colors)
wallplates or designer-style wallplates from other
manufacturers. Wallplates are sold separately.
• Lutron Claro and Satin Colors wallplates snap on
with no visible means of attachment.
• Requires a one-gang U.S. wallbox; 3
1
⁄2 in (89mm)
deep recommended, 2
1
⁄4 in (57 mm) deep minimum.
• Green indicator lights.
System Communications and Capacity
• Maestro Wireless controls communicate with the
Pico wireless controls and Radio Power Savr sensors
through radio frequency (RF).
• Maestro Wireless local controls must be located
within 60 ft (18 m) line-of-sight or 30 ft (9 m) through
walls, of Radio Power Savr sensors.
• Maestro Wireless local controls must be located
within 100 ft (30 m) line-of-sight or 30 ft (9 m)
through walls, of a Pico wireless control.
• Up to ten Maestro Wireless controls can be
configured to work together.
Environment
• Ambient operating temperature: 32 °F to 104 °F
(0°C to 40 °C), 0%–90% humidity, non-condensing.
Indoor use only.
7