Specification Sheet

Maestro® Sensor
369666c 2 09.11.12
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Switch with Occupancy/ Vacancy Sensor
Specifications
Regulatory Approvals
• UL
®ListedtoU.S.andCanadiansafety
requirements.
• NOMCertification(MS-modelsonly).
Power
• 120V~50/60Hz
1
• 120–277V~50/60Hz
1
Key Design Features
• Alllightingloads.
• Crush/tamperresistantlens.
• Smartambientlightdetection.
• Adaptiveswitchingalgorithmforextendedrelaylife.
• XCT
TM Technology for fine motion detection.
• Lutron
® patented Softswitch®.
Environment
• Ambientoperatingtemperature:32°Fto104°F
(0°Cto40°C),0%–90%humidity,non-condensing.
Indoor use only.
Warranty
• 5-YearLimitedWarranty.ForadditionalWarranty
information, please visit www.lutron.com/
TechnicalDocumentLibrary/Sensor_Warranty.pdf
Additional Information
• WhenusingMS-OPS2,MS-OPS5M,
MS-OPS6M2-DV,MS-VPS2,MS-VPS5M,or
MS-VPS6M2-DVonGFI-controlledcircuits,please
see Lutron
® P/N 048440.
• ForMaestro
® Occupancy sensing dimmer models,
please see Lutron
® P/N 369270.
• ForusewithMA-AS,MSC-AS,MA-AS-277,or
MSC-AS-277tocontroltheloadfrommorethantwo
locations, please see Lutron® P/N 048435.
• Formoreinformation,pleaseseewww.lutron.com/
occvacsensors
• LutronTechnicalHotline:1.800.523.9466.
Advanced Features
Switching
• Standardzerocross—maximizesrelaylifeby
switchingatthepointofminimumenergyontheAC
power curve.
• Adaptivezerocross—maximizesrelaylifeby
switchingatthepointofminimumenergyontheAC
powercurve.Activelyadaptstovariationsinrelay
timing.
• Lutron
®PatentedSoftswitch®circuit—eliminates
arcing at mechanical contacts when loads are
switched.Extendsrelaylifetoanaverageof
1,000,000cycles(on/off)forresistive,capacitive,or
inductive sources.
XCT
TM Technology
Advancedsensingtechnologyforfinemotion
detection ensures that the lights stay on while the
room is occupied, and that the sensor does not
turn on falsely when there is no occupancy in the
room.Formoreinformation,seewww.lutron.com/
TechnicalDocumentLibrary/white%20paper%20
XCT%204-23-09%20B.pdf
1
 MaximumcurrentratingsforindividualmodelsareprovidedintheSelection Matrixonpage4.
2