Cut Sheet

Maestro RF 0–10 V Sensor Dimmer / RF Sensor Switch SensorVive
3691097a 5 01.24.19
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Placement and Operation
• The ability of the sensor dimmer / switch to detect motion requires line-of-sight of room occupants and must have
an unobstructed view.
• Hot objects and moving air currents can affect the performance of the sensor dimmer / switch. For best
performance, the sensor dimmer / switch should be mounted at least 4 ft (1.2 m) away from HVAC vents and
light bulbs.
• The performance of the sensor dimmer / switch depends on a temperature differential between the ambient room
temperature and that of room occupants. Warmer rooms may reduce the ability of the sensor dimmer / switch to
detect occupants.
Horizontal Beam Diagram
(For Reference Only)
NEMA WD7 Test Grid Coverage
(High Sensitivity Setting)
Major motion coverage: 900 ft
2
(81 m
2
)
Minor motion coverage: 400 ft
2
(36 m
2
)
15 ft
(4.5 m)
10 ft
(3 m)
5 ft
(1.5 m)
0
5 ft
(1.5 m)
10 ft
(3 m)
15 ft
(4.5 m)
15 ft
(4.5 m)
10 ft
(3 m)
5 ft
(1.5 m)
0
5 ft
(1.5 m)
10 ft
(3 m)
15 ft
(4.5 m)
0 5 ft 10 ft 15 ft 20 ft 25 ft 30 ft
(1.5 m) (3 m) (4.5 m) (6 m) (7.5 m) (9m)
Vertical Beam Diagram
(For Reference Only)
0 10 ft 20 ft 30 ft
(3 m) (6 m) (9m)
4 ft
(1.2 m)
Beam 1
Beam 2
0 10 ft 20 ft 30 ft
(3 m) (6 m) (9m)
5