Cut Sheet

ManualsBrandsLutron ManualsDimmers & Switches - WiredOCC/VAC Switch, Maestro, Ivory

Table Of Contents

Copy of pdfformfields_file_11pages

Maestro RF 0–10 V Sensor Dimmer / RF Sensor Switch SensorVive

3691097a 1 01.24.19

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Maestro RF 0 –10 V Sensor Dimmer /

RF Sensor Switch

Lutron Maestro RF 0 –10 V Sensor Dimmer / RF

Sensor Switches are lighting controls with passive

infrared sensors that automatically control the lights

in an area. These sensors detect heat from

occupants moving within an area to determine when

the space is occupied.

Features Lutron Clear Connect RF technology, which

enables wireless communication with Radio Powr

Savr sensors, and Pico remote controls for light

control and general switched loads.

These products are also compatible with the Vive

hub which enables a simple setup process using a

standard web browser on any Wi-Fi enabled phone,

tablet or computer. It also enables control and

monitoring of all Vive devices. The Vive hub can be

added at any time, however system reprogramming

will be required. For a complete list of features

supported with the Vive hub, see specification

submittal 369902 at www.lutron.com

Features

• Controls 0 –10 V- electronic fluorescent ballasts or

LED driver load types

• Passive infrared motion detection with exclusive

Lutron XCT Technology for fine motion detection

• 180° sensor field-of-view

• Up to 30 ft × 30 ft (9 m × 9 m) [900 ft

(81 m

)]

major motion coverage and 20 ft × 20 ft (6 m × 6m)

[400ft

(36 m

)] minor motion coverage

• Occupancy version can be set to auto-on/auto-off or

manual-on/auto-off

• Adjustable timeout (1, 5, 15, or 30 minutes)

• Adjustable settings for auto-on light level (occupied

level): Fully adjustable from 1% –100%

• Adjustable settings for auto-off light level (occupied

level): Fully adjustable from 0% –100%

• Adjustable sensitivity level: High, Med, Low, Min

• Off warning fades lights to off over a period of

10seconds

• Adaptive switching algorithm for extended relay life

• Smart ambient light detection (ALD)

• Works with up to 10 Pico remote controls,

1 daylight, and 10 Radio Powr Savr PIR sensors

• High-end trim and low-end trim to adjust maximum

and minimum light levels

Dimmer Switch

Only available with the sensor dimmer. Not available with the sensor switch.

Summary of content (10 pages)

PAGE 1
Vive Maestro RF 0–10 V Sensor Dimmer / RF Sensor Switch Sensor 3691097a 1 01.24.19 Maestro RF 0 –10 V Sensor Dimmer / RF Sensor Switch Lutron Maestro RF 0 –10 V Sensor Dimmer / RF Sensor Switches are lighting controls with passive infrared sensors that automatically control the lights in an area. These sensors detect heat from occupants moving within an area to determine when the space is occupied.
PAGE 2
Vive Maestro RF 0–10 V Sensor Dimmer / RF Sensor Switch Sensor 3691097a 2 01.24.
PAGE 3
Vive Maestro RF 0–10 V Sensor Dimmer / RF Sensor Switch Sensor 3691097a 3 01.24.19 Specifications Regulatory Approvals • UL® Listed to U.S. and Canadian safety requirements • Complies with Title 20 and Title 24 Section 110.
PAGE 4
Vive Maestro RF 0–10 V Sensor Dimmer / RF Sensor Switch Sensor 3691097a 4 01.24.19 Custom Settings (default settings shown in bold ) Note: This is how to program these settings in standalone applications (not part of the Vive system). For a complete list and description of available settings for standalone applications, refer to Application Note #687 (048687) at www.lutron.
PAGE 5
Vive Maestro RF 0–10 V Sensor Dimmer / RF Sensor Switch Sensor 3691097a 5 01.24.19 Placement and Operation • The ability of the sensor dimmer / switch to detect motion requires line-of-sight of room occupants and must have an unobstructed view. • Hot objects and moving air currents can affect the performance of the sensor dimmer / switch. For best performance, the sensor dimmer / switch should be mounted at least 4 ft (1.2 m) away from HVAC vents and light bulbs.
PAGE 6
Vive Maestro RF 0–10 V Sensor Dimmer / RF Sensor Switch Sensor 3691097a 6 01.24.
PAGE 7
Vive Maestro RF 0–10 V Sensor Dimmer / RF Sensor Switch Sensor 3691097a 7 01.24.19 Mounting * Wallbox Recommended dimensions: 3.5 in (89 mm) D × 3 in (76 mm) H × 2 in (51 mm) W Sensor Dimmer Wallplate adapter/ Wallplate (sold separately) Mounting screws Adapter mounting screws * Mounting is the same for the dimmer and the switch.
PAGE 8
Vive Maestro RF 0–10 V Sensor Dimmer / RF Sensor Switch Sensor 3691097a 8 01.24.19 Wiring Connections In order to function all wires must be connected. Before installing wallplate, program all desired settings.
PAGE 9
Vive Maestro RF 0–10 V Sensor Dimmer / RF Sensor Switch Sensor 3691097a 9 01.24.
PAGE 10
Vive Maestro RF 0–10 V Sensor Dimmer / RF Sensor Switch Sensor 3691097a 10 01.24.19 Colors and Finishes Gloss Finishes White WH Ivory IV Almond AL Light Almond LA Gray GR Brown BR Black BL • Due to printing limitations, colors and finishes shown cannot be guaranteed to perfectly match actual product colors.