Cut Sheet

RF Local Controls
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Vive
Designer-style: Maestro
369904e 1 04.25.17
Vive Maestro Wireless Dimmers and
Switches
The Maestro Wireless solution incorporates Maestro
Wireless load controls, wireless sensors, and
wireless remote controls, which provide a system
that delivers energy savings, convenience, and ease
of installation.
Maestro Wireless dimmers and switches use Lutron
patented Clear Connect RF Technology, which
enables wireless communication with
RadioPowrSavr sensors and Pico remote controls
for light control and general switched loads.
These products are also compatible with the Vive
hub which enables a simple setup process using a
standard web browser on any Wi-Fi enabled phone,
tablet or computer. It also enables control and
monitoring of all Vive devices. The Vive hub can be
added at any time. System reprogramming will be
required. For a complete list of features supported
with the Vive hub, see specification submittal
369902.
Note for Replacement: MRF2S - the “S” model can
replace the non-”S” model.
Features
• The Maestro Wireless solution provides dimming /
switching of multiple load types, occupancy/vacancy
sensing, daylight harvesting, and high-end trim.
• Lutron patented Clear Connect RF Technology works
through walls and floors.
• Incorporates advanced features such as fade
ON / fade OFF, high-end trim, and rapid full-ON.
• Controls include Front Accessible Service Switch
(FASS) for safe lamp replacement.
• Two-wire dimmers and switches available for retrofit
applications.
• Power failure memory: If power is interrupted, the
control will return to its previously set level prior to
interruption.
Receiving Devices
Maestro Wireless Controls
Neutral and Non-Neutral
Dimmers
Neutral and Non-Neutral
Switches
Transmitting Devices
Radio Powr Savr Sensors
Pico Remote Controls
Ceiling-Mounted
Occupancy and
Vacancy Sensors
Wall-Mounted
Occupancy and
Vacancy Sensors
Daylight Sensors
1