Cut Sheet

Selecting LED Brightness
1. While in Main Menu Mode, press the Raise / Lower Rocker until LED 5 is blinking.
2. Press the Tap Button once.
3. Press the Raise / Lower Rocker to adjust to the desired brightness. (High or Low)
4. Press the Tap Button once to return to the Main Menu Mode.
LED 4: Low Brightness
Raise Light Level
Lower Light Level
LED 7: High Brightness
How to Save Settings and Exit Main Menu Mode
1. Press and Hold the Tap Button for 4 seconds to exit and save the Main Menu.
Note: If you wait 1 minute the dimmer will automatically exit from APM, however settings will not be saved.
Setting Delayed Fade-To-Off
1. While in Main Menu Mode, press the Raise / Lower Rocker until LED 4 is blinking.
2. Press the Tap Button once.
3. Press the Raise / Lower Rocker to adjust the waiting period. Each LED is equal to 10 seconds.
Examples; LED 4 is equal to 40 seconds; LED 2 is equal to 20 seconds
4. Press the Tap Button once to return to Main Menu Mode.
LED
Position
Delayed
Fade-To-Off Time
7 70 seconds
6 60 seconds
5 50 seconds
4 40 seconds
3 30 seconds (Default)
2 20 seconds
1 10 seconds
LED 7: Longest Delay: 70 Seconds
LED 1: Shortest Delay: 10 Seconds
8 www.lutron.com
Application Note #370