Cut Sheet

ManualsBrandsLutron ManualsDimmersWireless Switch, 3/6A, Digital, Maestro, White

Job Name:

Job Number:

Model Numbers:

PageSPECIFICATION SUBMITTAL

369-143 L 1 03.01.12

RF Local ControlsMaestro WirelessR Designer-style: Maestro

Maestro Wireless® Dimmers and Switches

The Maestro WirelessR solution incorporates

Maestro WirelessR load controls, wireless sensors,

and wireless remote controls, which provides a sys-

tem that delivers energy savings, convenience, and

ease of installation.

Maestro WirelessR dimmers and switches use Lutron

patented Clear ConnectT RF Technology, which

enables wireless communication with Radio Powr

SavrT sensors and PicoR wireless controls for light

control and general switched loads.

Features

• The Maestro WirelessR solution provides dimming/

switching of multiple load types, occupancy/vacancy

sensing, daylight harvesting, and high-end trim.

• Lutron patented Clear ConnectT RF Technology

works through walls and floors.

• Incorporates advanced features such as fade on/

fade off, high-end trim, and rapid full on.

• Controls include Front Accessible Service Switch

(FASST) for safe lamp replacement.

• Two-wire dimmers and switches available for retrofit

applications.

• Power failure memory: If power is interrupted, the

control will return to its previously set level prior to

interruption.

Wall-mounted

occupancy and

vacancy sensor

Daylight modules

Ceiling-mounted occupancy

and vacancy sensor

Neutral and

Non-Neutral Switches

Plug-In Modules

Lamp Dimmers

Neutral and

Non-Neutral Dimmers

Receiving Devices

Maestro WirelessR Controls

Transmitting Devices

Radio Powr SavrT Sensors

PicoR Wireless Controls

Summary of content (14 pages)

PAGE 1
Maestro WirelessR RF Local Controls Designer-style: MaestroR 369-143 L 1 03.01.12 Maestro Wireless® Dimmers and Switches he Maestro WirelessR solution incorporates T Maestro WirelessR load controls, wireless sensors, and wireless remote controls, which provides a system that delivers energy savings, convenience, and ease of installation.
PAGE 2
Maestro WirelessR RF Local Controls Designer-style: MaestroR 369-143 L 2 03.01.
PAGE 3
Maestro WirelessR RF Local Controls Designer-style: MaestroR 369-143 L 3 03.01.12 Dimmer Load Type and Capacity Neutral Required Control Voltage Load Type Minimum Load Incand. Maximum Load Not Ganged End of Gang Middle of Gang 25 W 600 W 500 W 400 W MLV2 25 W / VA 450 W / 600 VA 400 W / 500 VA 300 W / 400 VA MRF2-6ND-1201,2,4 120 V~ MRF2-6ELV2 120 V~ ELV2 5W 600 W 500 W 400 W MRF2-F6AN-DV3,5 120–277 V~ Lighting 1 ballast 0.05 A 6A 5A 3A Load Type Minimum Load Incand.
PAGE 4
Maestro WirelessR RF Local Controls Designer-style: MaestroR 369-143 L 4 03.01.12 Maestro WirelessR Switches Switch Model Numbers Switches Lighting and motor loads MRF2-6ANS-XX* 6 A Lighting/3 A Fan (1/10 HP motor), Electronic Switch 120 V~ MRF2-8ANS-120-XX* 8 A Lighting, 5.
PAGE 5
Maestro WirelessR RF Local Controls Designer-style: MaestroR 369-143 L 5 03.01.12 Switch Load Type and Capacity Neutral Required Control Voltage MRF2-8ANS-1201,3 120 V~ MRF2-6ANS1 120 V~ MRF2-6ANS-2772 277 V~ Load Type Minimum Load Maximum Load Not Ganged End of Gang Middle of Gang Lighting 25 W 8A 6.5 A 5A Fan Motor 0.2 A 1/4 HP 5.8 A 1/4 HP 5.8 A 1/6 HP 4.4 A Lighting 25 W 6A 5A 3.5 A Fan Motor 0.2 A 1/10 HP 3A 1/10 HP 3A 1/10 HP 3A Lighting 25 W 6A 5A 3.
PAGE 6
Maestro WirelessR RF Local Controls Designer-style: MaestroR 369-143 L 6 03.01.12 Specifications Regulatory Approvals • UL Listed. • CSA Certified. • FCC Approved. Complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. • Industry Canada Certified. Power Operating voltage: 120 V~ 50/60 Hz 277 V~ 50/60 Hz (MRF2-6ANS-277, MRF2-8S-DV, MRF2-F6AN-DV) Key Design Features Dimmers • On a single-tap, lights fade UP or DOWN. • On a double-tap, lights go to full ON.
PAGE 7
Maestro WirelessR RF Local Controls Designer-style: MaestroR 369-143 L 7 03.01.
PAGE 8
Maestro WirelessR RF Local Controls Designer-style: MaestroR 369-143 L 8 03.01.12 Dimensions Side View Front View 411⁄16 in (119 mm) 215⁄16 in (75 mm) 11⁄8 in 5/16 in (30 mm) (8 mm) Ganging and Derating When ganging with other controls in the same wallbox, derating is required. See Load Type and Capacity chart. Only MRF2-8ANS controls have fins that need to be removed for multigang installations. No other controls have fins, but they must still be derated in multigang installations.
PAGE 9
Maestro WirelessR RF Local Controls Designer-style: MaestroR 369-143 L 9 03.01.
PAGE 10
Maestro WirelessR RF Local Controls Designer-style: MaestroR 369-143 L 10 03.01.12 Wiring Diagrams Single Location Installation MRF2-8S-DV* Dimmer / Switch Brass Blue - unused, tighten1 Optional Hot/Live 120 V~3 60 Hz or 277 V~3 60 Hz Black Green Load LUT-MLC* LUT-MLC ensures proper function when fluorescent, CFL, or LED * Aloads are used. Install the LUT-MLC inside a load fixture or in a separate J-box of the circuit.
PAGE 11
Maestro WirelessR RF Local Controls Designer-style: MaestroR 369-143 L 11 03.01.
PAGE 12
Maestro WirelessR RF Local Controls Designer-style: MaestroR 369-143 L 12 03.01.
PAGE 13
Maestro WirelessR RF Local Controls Designer-style: MaestroR 369-143 L 13 03.01.
PAGE 14
Maestro WirelessR RF Local Controls Designer-style: MaestroR 369-143 L 14 03.01.