Cut Sheet

SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
3691112a 2 01.09.19
Wallbox ControlsPhase-Selectable Dimmer
Maestro
Performance
• Power failure memory: Should power be interrupted,
the control will return to its previous state when
power is restored.
• Tested to withstand surge voltages without damage
or loss of operation, in accordance with
IEEE C62.41-1991 Recommended Practice on Surge
Voltages in Low-Voltage AC Power Circuits.
• Tested to withstand electrostatic discharge without
damage or memory loss.
• For 3-way and 4-way dimming, use Maestro
Companion Dimmers. One dimmer can be used
with up to 9 multi-location companion dimmers.
• Total multi-location wire length (blue wire) between
all units must not exceed 250 ft (76 m).
• Includes a Front Accessible Service Switch (FASS)
for safe bulb replacement.
Application Requirements
• When using LEDs or CFLs, only bulbs marked
or rated as Dimmable can be used.
• For a complete list of approved DIMMABLE LEDs
and CFLs please visit www.lutron.com/ledfinder
Mounting
• Requires a U.S. wallbox. 3.5 in (89 mm) deep
recommended, 2.25 in (57 mm) deep minimum.
Warranty
• 1 Year Limited Warranty
For additional Warranty information, please visit
www.lutron.com/TechnicalDocumentLibrary/
369-119_Wallbox_Warranty.pdf
Specifications
Regulatory Approvals
• cULus listed
• UL® Listed to U.S. and Canadian safety
requirements (UL 1472 / CSA C22.2 184.1)
• NOM
• NEMA SSL-7A-2015 forward phase compliant
Power and Ratings
• 120 V~ 50 / 60 Hz
• Maximum Load
– 250 W Dimmable LED in reverse-phase
(150 W in forward phase)
or
– 500 W Incandescent / Halogen / ELV
or
– 400 VA MLV
or
– 20 Lutron Hi-lume 1% 2-Wire (LTE) LED Drivers
or
– Mixed bulb type per Multigang and Mixed Bulb
Type Ratings table (see page 5)
• Minimum Load
– See approved lamp list for LED / CFL
at www.lutron.com/ledfinder
Environment
• For indoor use only
• Operating temperatures 32°F (0°C) to 104°F (40°C)
• Relative humidity: 0% to 90% non-condensing
– Dimmer: 0.2 W (TBD)
2