Advance Installation

Wireless

Roller Shades with a Single-Button (Battery-Powered and Plug-In)

Removing Paired Pico® Remote Controls from a Lutron® Roller Shade

Tap the shade button quickly three times, holding on the last press.

Release the button, then immediately tap the button three more times.

Continue to hold the shade button until the shade button LED ﬂashes green.

NOTE: The shade button LED will ﬂash GREEN-then-RED three times, signaling the successful completion of the procedure.

NOTE: This procedure will remove all paired Pico

® remote controls and favorite button programming. Upper and lower limits are retained.

TAP

HOLD

TAP