Advance Installation

ManualsBrandsLutron ManualsHome AutomationLutron Caseta Wireless Dimmer & Pico Remote Kit, White

Wireless

0301710b 09/2014

Advanced Installation GuideAdvanced Installation Guide

3-Way Installation - CasétaTM Wireless In-Wall Dimmer with Pico® Remote Control: If you have two switches

controlling your lights, follow this procedure to install your in-wall dimmer. .............................................................................Page 2 - 5

3-Way Installation - Caséta

TM Wireless In-Wall Switch with Pico® Remote Control: If you have two switches

controlling your lights, you can follow this procedure to install your in-wall switch. .................................................................Page 6 - 9

3-Way Installation - Caséta

TM Wireless In-Wall Switch with Mechanical Toggle Switch: If you have two switches

controlling your lights, you can follow this procedure to install your in-wall switch. .................................................................Page 10 - 12

Multi-Location Installation - Caséta

TM Wireless In-Wall Dimmer with Pico® Remote Controls: If you have three or

more switches controlling your lights, follow this procedure to install your in-wall dimmer ......................................................Page 13 - 17

Multi-Location Installation - Caséta

TM Wireless In-Wall Switch with Pico® Remote Controls: If you have three or

more switches controlling your lights, follow this procedure to install your in-wall switch ........................................................Page 18 - 22

Adjusting Low-End Trim on a Caséta

TM Wireless In-Wall Dimmer: Follow this procedure if you experience performance

issues such as flickering, flashing or other abnormal light behavior when your in-wall dimmer is at a low light level .................. Page 23

Adjusting High-End Trim on a Caséta

TM Wireless In-Wall Dimmer: Follow this procedure to adjust the maximum light

output allowed by your in-wall dimmer .......................................................................................................................................Page 24

Adjusting Low-End Trim on a Caséta

TM Wireless Plug-In Lamp Dimmer: Follow this procedure if you experience

performance issues such as flickering, flashing or other abnormal light behavior when your plug-in lamp dimmer

is at a low light level ...................................................................................................................................................................Page 25

Adjusting High-End Trim on a Caséta

TM Wireless Plug-In Lamp Dimmer: Follow this procedure to adjust the maximum

light output allowed by your plug-in lamp dimmer .....................................................................................................................Page 26

Converting a Caséta

TM Wireless Plug-In Lamp Dimmer to a Switch to Control Non-Dim Loads (Lights Only):

Follow this procedure if you would like your plug-in lamp dimmer to act as a switch for non-dimmable lighting loads ..........Page 27

Removing Paired Pico

® Remote Controls from a CasétaTM Wireless Dimmer: Follow this procedure if you need to

remove paired Pico® remote controls or reset your dimmer to its factory default settings .......................................................Page 28

Removing Paired Pico

® Remote Controls from a CasétaTM Wireless In-Wall Switch: Follow this procedure if you need

to remove paired Pico

® remote controls or reset your switch to its factory default settings .....................................................Page 29

Removing Paired Pico

® Remote Controls from a Lutron® Shade: Follow this procedure if you need to remove paired

Pico® remote controls from a Lutron® Shade ..............................................................................................................................Page 30-31

Changing the Favorite Light Level on a Pico

® Remote Control: Follow this procedure to change the light level

your dimmer recalls when you press the "Favorite" button on your PicoR remote control .........................................................Page 32

Installing a LUT-MLC Load Adapter with a Caséta

TM Wireless In-Wall Switch: The LUT-MLC is provided to help

ensure proper operation of the CasétaTM Wireless switch with LED, CFL, fluorescent, and ELV lighting loads .........................Page 33

Troubleshooting .........................................................................................................................................................................Page 34

In-wall dimmer

PD-6WCL

Plug-in lamp dimmer

PD-3PCL

Thank you for purchasing CasétaT Wireless from Lutron. This document will guide you through several additional

installation topics beyond those covered in the quick-start guide included with your product.

Table of Contents

In-wall switch

PD-5WS-DV

Summary of content (34 pages)

PAGE 1
0301710b 09/2014 Wireless Advanced Installation Guide In-wall dimmer PD-6WCL Plug-in lamp dimmer PD-3PCL In-wall switch PD-5WS-DV Thank you for purchasing CasétaT Wireless from Lutron. This document will guide you through several additional installation topics beyond those covered in the quick-start guide included with your product.
PAGE 2
Wireless 3-Way Installation - CasétaTM Wireless In-Wall Dimmer with Pico® Remote Control 1 4 Identify existing wiring Location 1 Turn power off at circuit breaker Location 2 WARNING! Shock Hazard. May result in serious injury or death. Turn off power at circuit breaker before installing the unit.
PAGE 3
Wireless 3-Way Installation - CasétaTM Wireless In-Wall Dimmer with Pico® Remote Control 7 9 Remove side sections (if necessary) When installing more than one CasétaTM Wireless dimmer in the same wallbox, it is necessary to remove inner side sections prior to wiring. See image and chart below for more information. Mount the CasétaTM Wireless dimmer Location 1 Do not remove outside side sections on dimmers at the end of gang.
PAGE 4
Wireless 3-Way Installation - CasétaTM Wireless In-Wall Dimmer with Pico® Remote Control 13 Connect the wires Pairing the dimmer and PicoR remote control Location 2 17 Press and hold "Off" button on dimmer Location 1 0 5 10 UNTIL 15 6 sec. Tagged Wire Status LEDs ﬂash Ground 14 Attach the wallplate bracket and Pico® remote control HOLD Location 2 18 Press and hold "Off" button on remote control Location 2 3x 0 5 10 15 UNTIL 15 Attach the wallplate 6 sec.
PAGE 5
Wireless 3-Way Installation - CasétaTM Wireless In-Wall Dimmer with Pico® Remote Control Schematic Diagram Traveller Line / Hot Pico® Remote Control Traveller CasétaTM Wireless Dimmer * Load Ground Neutral Tagged Wire Tagged Wire * Dimmer may be installed in either location.
PAGE 6
Wireless 3-Way Installation - CasétaTM Wireless In-Wall Switch with Pico® Remote Control 1 4 Identify existing wiring Location 1 Turn power off at circuit breaker Location 2 WARNING! Shock Hazard. May result in serious injury or death. Turn off power at circuit breaker before installing the unit.
PAGE 7
Wireless 3-Way Installation - CasétaTM Wireless In-Wall Switch with Pico® Remote Control 7 9 Remove side sections (if necessary) When installing more than one CasétaTM Wireless switch in the same wallbox, it is necessary to remove inner side sections prior to wiring. See image and chart below for more information. Mount the CasétaTM Wireless switch Location 1 Do not remove outside side sections on switches at the end of gang.
PAGE 8
Wireless 3-Way Installation - CasétaTM Wireless In-Wall Switch with Pico® Remote Control 13 Connect the wires Pairing the switch and PicoR remote control Location 2 17 Press and hold "Off" button on switch Location 1 0 5 10 UNTIL 15 6 sec. Tagged Wire Status LED ﬂashes Ground 14 Attach the wallplate bracket and Pico® remote control HOLD Location 2 18 Press and hold "Off" button on remote control Location 2 3x 0 5 10 15 UNTIL 15 Attach the wallplate 6 sec.
PAGE 9
Wireless 3-Way Installation - CasétaTM Wireless In-Wall Switch with Pico® Remote Control Schematic Diagram Traveller Black Blue Line / Hot Pico® Remote Control Traveller CasétaTM Wireless Black Switch * Load Ground (Green) Neutral Tagged Wire Tagged Wire * Switch may be installed in either location.
PAGE 10
Wireless 3-Way Installation - CasétaTM Wireless In-Wall Switch with Mechanical Toggle Switch 1 4 Identify existing wiring Location 1 Turn power off at circuit breaker Location 2 WARNING! Shock Hazard. May result in serious injury or death. Turn off power at circuit breaker before installing the unit.
PAGE 11
Wireless 3-Way Installation - CasétaTM Wireless In-Wall Switch with Mechanical Toggle Switch 7 9 Remove side sections (if necessary) When installing more than one CasétaTM Wireless switch in the same wallbox, it is necessary to remove inner side sections prior to wiring. See image and chart below for more information. Mount the CasétaTM Wireless switch Location 1 Do not remove outside side sections on switches at the end of gang.
PAGE 12
Wireless 3-Way Installation - CasétaTM Wireless In-Wall Switch with Mechanical Toggle Switch 13 14 Remount existing switch Turn power on at circuit breaker Location 2 Important note: Pico® remote control (optional) If you would like to pair a Pico® remote control to the CasétaTM Wireless in-wall switch, please follow the procedure described in the quick-start guide that came with your switch.
PAGE 13
Wireless Multi-Location Installation - CasétaTM Wireless In-Wall Dimmer with Pico® Remote Controls 1 3 Identify existing wiring Location 1 Location 2 Choose a location for your CasétaTM Wireless dimmer NOTE: There will be two different types of existing switches in this application. Locations 1 and 3 will use 3-way switches (three screws which control the lights, plus one ground screw) and Location 2 will use a 4-way switch (four screws which control the lights, plus one ground screw).
PAGE 14
Wireless Multi-Location Installation - CasétaTM Wireless In-Wall Dimmer with Pico® Remote Controls 6 8 Tag and disconnect wires from the existing switch Location 1 Connect the CasétaTM Wireless dimmer Location 1 Tagged wire Place tag - to identify wire on different color screw Ground (Green / Bare Copper) 7 Different Color Screw Ground (Green / Bare Copper) Remove side sections (if necessary) When installing more than one CasétaTM Wireless dimmer in the same wallbox, it is necessary to remove
PAGE 15
Wireless Multi-Location Installation - CasétaTM Wireless In-Wall Dimmer with Pico® Remote Controls 11 14 Remove existing switch from wall at Location 2 Location 2 Location 2 15 12 Attach the wallplate bracket and Pico® remote control Tag and disconnect wires from the existing switch Attach the wallplate Location 2 ‘snap’ Location 2 Place tags - to identify wires on different color screws Wallplate Adapter Different Color Screws 16 Ground (Green / Bare Copper) Remove existing switch from wa
PAGE 16
Wireless Multi-Location Installation - CasétaTM Wireless In-Wall Dimmer with Pico® Remote Controls 17 21 Tag and disconnect wires from the switch Turn power on at circuit breaker Location 3 Place tag - to identify wire on different color screw Pairing the dimmer and PicoR remote controls Ground (Green / Bare Copper) Different Color Screw 22 18 Connect the wires Press and hold "Off" button on dimmer Location 1 Location 3 Tagged Wire 0 5 10 UNTIL 15 6 sec.
PAGE 17
Wireless Multi-Location Installation - CasétaTM Wireless In-Wall Dimmer with Pico® Remote Controls Schematic Diagram Location 1 Location 2 Traveller Traveller Line / Hot CasétaTM Wireless Dimmer * Location 3 Pico® Remote Control Traveller Traveller Pico® Remote Control Load Ground Neutral Tagged Wire Tagged Wires * It is recommended to install dimmer in either Location 1 or 3.
PAGE 18
Wireless Multi-Location Installation - CasétaTM Wireless In-Wall Switch with Pico® Remote Controls 1 3 Identify existing wiring Location 1 Location 2 Choose a location for your CasétaTM Wireless switch NOTE: There will be two different types of existing switches in this application. Locations 1 and 3 will use 3-way switches (three screws which control the lights, plus one ground screw) and Location 2 will use a 4-way switch (four screws which control the lights, plus one ground screw).
PAGE 19
Wireless Multi-Location Installation - CasétaTM Wireless In-Wall Switch with Pico® Remote Controls 6 8 Tag and disconnect wires from the existing switch Location 1 Connect the CasétaTM Wireless switch Location 1 Tagged wire Place tag - to identify wire on different color screw Black Blue Black Ground (Green / Bare Copper) 7 Different Color Screw Remove side sections (if necessary) Ground (Green Wire) When installing more than one CasétaTM Wireless switch in the same wallbox, it is necessary
PAGE 20
Wireless Multi-Location Installation - CasétaTM Wireless In-Wall Switch with Pico® Remote Controls 11 14 Remove existing switch from wall at Location 2 Location 2 Location 2 15 12 Attach the wallplate bracket and Pico® remote control Tag and disconnect wires from the existing switch Attach the wallplate Location 2 ‘snap’ Location 2 Place tags - to identify wires on different color screws Wallplate Adapter Different Color Screws 16 Ground (Green / Bare Copper) Remove existing switch from wa
PAGE 21
Wireless Multi-Location Installation - CasétaTM Wireless In-Wall Switch with Pico® Remote Controls 17 21 Tag and disconnect wires from the existing switch Turn power on at circuit breaker Location 3 Place tag - to identify wire on different color screw Pairing the switch and PicoR remote controls Ground (Green / Bare Copper) 18 Different Color Screw 22 Connect the wires Press and hold "Off" button on dimmer Location 1 Location 3 Tagged Wire 0 5 10 UNTIL 15 6 sec.
PAGE 22
Wireless Multi-Location Installation - CasétaTM Wireless In-Wall Switch with Pico® Remote Controls Schematic Diagram Location 1 Black Location 2 Location 3 Traveller Traveller Blue Line / Hot Black CasétaTM Wireless Switch * Traveller Pico® Remote Control Traveller Pico® Remote Control Load Ground (Green) Neutral Tagged Wire Tagged Wires * It is recommended to install switch in either Location 1 or 3.
PAGE 23
Wireless Adjusting Low-End Trim on a CasétaTM Wireless In-Wall Dimmer 2 Adjust (continued) b. On Brighter UNTIL Darker Off Light stops ﬂickering and is stable TAP In-wall dimmer 3 Save Adjusting Low-End Trim UNTIL To optimize performance of CFL / LED lamps 1 Enter Status LED stops ﬂashing 0 5 10 UNTIL HOLD 15 6 sec. 4 A status LED starts ﬂashing Verify a. a. Tap "Off" one time. Light will turn off. HOLD 2 b. Tap "Brighter" one time. Light will turn on. Adjust c.
PAGE 24
Wireless Adjusting High-End Trim on a CasétaTM Wireless In-Wall Dimmer 2 Adjust (continued) b. On Brighter UNTIL Darker Off Desired light level is achieved TAP In-wall dimmer 3 Adjusting High-End Trim - Save To optimize performance of CFL / LED lamps 1 UNTIL Enter Status LED stops ﬂashing 0 5 10 UNTIL 15 6 sec. HOLD A status LED starts ﬂashing HOLD 2 Adjust a.
PAGE 25
Wireless Adjusting Low-End Trim on a CasétaTM Wireless Plug-In Lamp Dimmer 2 On Adjust (continued) b. Brighter Darker UNTIL Off Plug-in lamp dimmer Adjusting Low-End Trim - 3 To optimize performance of CFL / LED lamps 1 Light stops ﬂickering and is stable TAP Save Enter UNTIL UNTIL 0 5 The indicator LED stops ﬂashing 10 15 6 sec. HOLD The indicator LED starts ﬂashing 4 HOLD a. 2 Verify a. Tap "Off" one time. Light will turn off. b. Tap "Brighter" one time. Light will turn on.
PAGE 26
Wireless Adjusting High-End Trim on a CasétaTM Wireless Plug-In Lamp Dimmer 2 On Adjust (continued) b. Brighter Darker UNTIL Off Plug-in lamp dimmer Desired light level is achieved TAP Adjusting High-End Trim To optimize performance of CFL / LED lamps 3 1 Save Enter UNTIL 0 5 UNTIL 10 15 6 sec. The indicator LED stops ﬂashing The indicator LED starts ﬂashing HOLD HOLD 2 Adjust a.
PAGE 27
Wireless Converting a CasétaTM Wireless Plug-In Lamp Dimmer to a Switch to Control Non-Dim Loads 2 Verify On a. Brighter a. Tap "Off" one time. Light will turn off. b. Tap "On" one time. Light will turn on. – The "Brighter" and "Darker" buttons will be disabled and do nothing. Darker Off Plug-in lamp dimmer b. 1 Press and Hold "On" and "Off" buttons NOTE: Only use lighting loads on your plug-in lamp dimmer, even when operating in switch mode. UNTIL 0 5 10 15 6 sec.
PAGE 28
Wireless Removing Paired Pico® Remote Controls from a Caséta Wireless Dimmer TM 1 Tap the "On" button quickly three times, holding on the last press 3 Release the button, then immediately tap the button three more times OR OR TAP 3x TAP 3x TAP 3x 2 TAP 3x Continue to hold the "On" button until the light begins to ﬂash quickly 3x Light will ﬂash slowly three times, then turn off 4 0 5 10 HOLD OR All paired Pico® remote controls are removed and all settings are returned to factory default –
PAGE 29
Wireless Removing Paired Pico® Remote Controls from a Caséta Wireless In-Wall Switch TM 1 Tap the "On" button quickly three times, holding on the last press 3 Release the button, then immediately tap the button three more times Status LED ﬂashes quickly TAP 3x 2 TAP 3x Continue to hold the "On" button until the Status LED begins to ﬂash slowly 0 AND 2x 5 10 Light will ﬂash slowly two times 15 3 sec.
PAGE 30
Wireless Removing Paired Pico® Remote Controls from a Lutron® Honeycomb Shade NOTE: This procedure will remove all paired Pico® remote controls and favorite button programming. Upper and lower limits are retained. 1 Tap the shade button quickly three times, holding on the last press. TAP 3x 2 Continue to hold the shade button until the shade button LED ﬂashes green. HOLD 3 Release the button, then immediately tap the button three more times.
PAGE 31
Wireless Removing Paired Pico® Remote Controls from a Lutron® Roller Shade Roller Shades with a Single-Button (Battery-Powered and Plug-In) NOTE: This procedure will remove all paired Pico® remote controls and favorite button programming. Upper and lower limits are retained. 1 Tap the shade button quickly three times, holding on the last press. 3x TAP 2 Continue to hold the shade button until the shade button LED ﬂashes green.
PAGE 32
Wireless Changing the Favorite Light Level on a Pico® Remote Control 3 a. Favorite Set desired light level on a dimmer that has already been paired with a remote control b. or 2 Save favorite light level 0 5 10 15 6 sec. a. Tap "Off" button one time on remote control. Light will turn off. b. Tap "Favorite" button one time on remote control. Light will turn on to the newly saved level. You can use the round “Favorite” button on a Pico® remote control to recall a favorite light level.
PAGE 33
Wireless Installing a LUT-MLC Load Adapter with a Caséta Wireless In-Wall Switch TM 1 Identify load type LED Fluorescent CFL Turn power off at circuit breaker Choose installation location The LUT-MLC must be connected to the neutral and switched hot feed to the load. Install the LUT-MLC inside a load fixture or in a separate junction box within the circuit. 4 Installing the LUT-MLC in a load ﬁxture or junction box 1. Connect one lead of the LUT-MLC to the neutral (white) wire. 2.
PAGE 34
Wireless Troubleshooting Symptoms Probable cause and action Light does not turn on or LEDs on the devices do not illuminate. • Light bulb(s) burned out. • Breaker is OFF or tripped. • Light not properly installed. • Wiring error. In-wall dimmer or switch: • FASST on the dimmer or switch is in the off position. Plug-in lamp dimmer: • Outlet is switched off. • Lamp is turned off. • Lamp is not plugged in. Light does not respond to PicoR remote control.