How to Guide

ManualsBrandsLutron ManualsLighting ControlsGL-600P-WH

Color Palette

(For latest color information, visit www.lutron.com)

WH IV AL LA

Matte

Finish Detail

Technical Support • 24 Hours/7 Days • 1·800·523·9466 • www.lutron.com

The Multi-Location Smart Dimmer

with a New Look

Shown actual size:

Faedra Smart Dimmer in white (WH).

2.86” (73mm)

4.60” (117mm)

0.23”

(5.8mm)

Matte surround

Gloss button

Product Family Features

• High-tech “Smart Dimmer” with

microprocessor technology for

a traditional wallplate opening

• Special Features!

- Two taps on the button bring

lights on to full brightness

- Press and hold the button to set

the delay before the lights go off

- Choose to lock-in a preset or turn

on to the last light level

• LEDs indicate light level and glow

softly as a locator light in the dark

• Multi-location dimming from up

to 10 locations

• Uses standard single-pole and

3-way wiring for easy installation

Specification Features

(See Performance Specifications, pg.190)

• Power-failure memory

• Line frequency compensation

• Electrostatic discharge protection

• Captive button and rocker

• Front Accessible Service Switch (FASS

™

)

to disconnect load power

• Includes radio frequency interference

suppression circuitry

• Precise color consistency

• UV stable color

Summary of content (20 pages)

PAGE 1
The Multi-Location Smart Dimmer with a New Look Product Family Features 0.23” (5.8mm) 4.60” (117mm) 2.
PAGE 2
Faedra ™ Dimmers and Fan Controls Smart Dimmers Accessory Dimmers For use in multi-location dimming only–use up to nine accessory dimmers with only one Faedra multilocation dimmer (far left) LEDs indicate light level, glow softly One tap on/off to selected light level; two taps full bright; user selectable fade-to-off Press rocker to adjust light level Front accessible service switch (FASS™) Electronic Switches Accessory Switches For use in multi-location switching only–use up to nine accessory switc
PAGE 3
Faedra ™ Description Maximum Capacity* Model # Important Information Smart Dimmers Ships in 48 hrs. Incandescent Color Palette Matte Finish Preset Smart Dimmers Single-Location 600W FA-600Single-Location 1000W FA-1000Multi-Location 600W FA-600MMulti-Location 1000W FA-1000MProducts Above: For multi-location dimming, use one Faedra multi-location dimmer with Faedra accessory dimmers, FA-AD-, pg.85. Not for use with mechanical 3-way or 4-way switches. Minimum load for dimmers listed above is 40W.
PAGE 4
Faedra ™ Description Maximum Capacity* Model # Important Information Ships in 48 hrs. Provide Multi-Location Dimming from Up to Nine Additional Locations. Color Palette Matte Finish Accessory Dimmers FA-ADFor multi-location dimming, use up to nine Faedra accessory dimmers with one Faedra multi-location dimmer. Product Above: Not for use with mechanical 3-way or 4-way switches. Maximum traveller wiring run for multi-location applications is 250’ (76.2m). No derating required if ganged.
PAGE 5
™ The Dimmer that Replaces Your Toggle Switch with a New Look Product Family Features 0.23” (5.8mm) 4.60” (117mm) 2.
PAGE 6
Qoto ™ Installation Considerations Switches General purpose switching of all lighting sources and motor loads Push on/off to selected light level Select light level Description Push on/off Maximum Capacity* Model # 2.50” Deep Backbox Recommended (minimum) Control Depth ≤ 1.44” (37mm) Important Information Dimmers Ships in 48 hrs.
PAGE 7
The Dimmer That Matches Your Toggle Switches Product Family Features 0.23” (5.8mm) 4.60” (117mm) 2.
PAGE 8
Ariadni ® Switch on/off to selected light level Switch on/off to selected light level Select light level Select light level Soft glow night light Preset Fan Controls Switch on/off to selected fan speed Select fan speed Preset Dimmers with Slide-to-Off Fan Control Dimmers and Fan Controls Preset Dimmers with Night Light Preset Dimmers Switch on/off to selected light level Select light level Select fan speed and slide-to-off Key to Models Available Incandescent M a g n e t i c L o w Vo l t a g e
PAGE 9
Ariadni ® Description Maximum Capacity* Model # Important Information Dimmers Ships in 48 hrs. Incandescent Color Palette Gloss Finish Preset Dimmers Single Pole 600W AY-600PSingle Pole 1000W AY-10P3-Way** 600W AY-603P3-Way** 1000W AY-103PProducts Above: 600W Ariadni dimmers have screw and push-in terminals. Derating required if ganged, pg.103.
PAGE 10
Ariadni ® Description Maximum Capacity* Model # Important Information Ships in 48 hrs. Fluorescent Dimming with Hi-lume® Electronic Ballasts Color Palette Gloss Finish Preset Dimmers Single Pole/3-Way** 8A AYF-103PProducts Above: Use with Lutron Hi-lume line-voltage control electronic dimming ballasts only. Please refer to the Lutron Fluorescent Dimming Systems Selection Guide, P/N 366-002, or visit www.lutron.com for more information. Requires neutral wire connection. No derating required if ganged.
PAGE 11
The Slide Dimmer for Traditional Wallplates Product Family Features 0.23” (5.8mm) 2.86” (73mm) • Slide dimmer for a traditional wallplate opening • Preset and slide-to-off models available • Fan controls available • Dimmers available in 600W and 1000W models Specification Features 4.60” (117mm) • • • • • (See Performance Specifications, pg.
PAGE 12
Glyder ® Select light level with slider; slide on/off Preset Dimmers Select light level with slider; push on to selected light level/off Slide-to-Off Fan Controls Select fan speed with slider; slide on/off Dimmers and Fan Controls Slide-to-Off Dimmers Replacement Knobs Slide-to-off Preset Key to Models Available Incandescent M a g n e t i c L o w Vo l t a g e F u l l y Va r i a b l e Fassada™ Wallplates, pg.100 Installation Considerations 2.
PAGE 13
Glyder ® Description Maximum Capacity* Model # Important Information Dimmers Ships in 48 hrs. Incandescent Color Palette Gloss Finish Slide-to-Off Dimmers Single Pole 600W GL-600Single Pole 1000W GL-1000Products Above: Derating required if ganged, pg.103. Add color suffix to model # Example: GL-600- WH WH White IV Ivory Wallplates Preset Dimmers Single Pole 600W GL-600PSingle Pole 1000W GL-10P3-Way** 600W GL-603P3-Way** 1000W GL-103PProducts Above: Derating required if ganged, pg.103.
PAGE 14
Glyder ® Description Maximum Capacity* Model # Important Information Ships in 48 hrs. Fully Variable Controls Color Palette Gloss Finish Use for one or more ceiling paddle fans or exhaust fans (do not mix fan types on one control). Slide-to-Off Fan Controls Single Pole/Adjustable 5A GFS-5EMinimum Speed Product Above: To use as a combined fan control/light switch (360W incandescent), see Wiring Diagram #17 and #18, pg.211. Derating required if ganged, pg.103.
PAGE 15
The Original Rotary Dimmer Product Family Features 0.23” (5.8mm) 2.86” (73mm) • The original solid-state dimmer introduced by Lutron in 1961 • Night light models available • Matching fan controls available Specification Features 4.60” (117mm) (See Performance Specifications, pg.190) • Electrostatic discharge protection • Mechanical air-gap switch to disconnect load power • Includes radio frequency interference suppression circuitry Shown actual size: Rotary dimmer dimmer in white (WH).
PAGE 16
Rotary Push On/Off Dimmers Push On/Off Dimmers with Dim-N-Glo™ Night Light Night light glows behind knob Rotate to select light level; rotary on/off Rotate to select light level; push on/off Rotary On/Off Fan Controls Rotate to select one of three fan speeds; rotary on/off Rotate to select light level; push on/off Dimmers and Fan Controls Rotary On/Off Dimmers Replacement Knobs Rotate to select fan speed; rotary on/off Standard rotary dimmer and fully variable fan control knob Quiet, 3-speed fan
PAGE 17
Rotary Description Maximum Capacity* Model # Important Information Dimmers Ships in 48 hrs. Incandescent Color Palette Gloss Finish Rotary On/Off Dimmers Single Pole 600W D-600RProduct Above: Derating required if ganged, pg.103. Add color suffix to model # Example: D-600R- WH WH White IV Ivory Wallplates Wallplates sold separately. Use Fassada™ wallplates, pg.100, or standard wallplates. Push On/Off Dimmers Single Pole 600W D-600P3-Way** 600W D-603PProducts Above: Derating required if ganged, pg.
PAGE 18
Rotary Description Maximum Capacity* Model # Important Information Ships in 48 hrs. Quiet Controls Color Palette Gloss Finish For use with one ceiling paddle fan. Rotary On/Off Fan Controls Single Pole, 3-Speed 1.5A FSQ-2FProduct Above: No derating required if ganged. Add color suffix to model # Example: FSQ-2F- WH WH White IV Ivory Wallplates Wallplates sold separately. Use Fassada™ wallplates, pg.100, or standard wallplates.
PAGE 19
Fashion Wallplates for Traditional-Style Products Product Family Features 0.23” (5.8mm) 4.60” (117mm) 2.86” (73mm) • Wallplates feature clean appearance with no visible screws • Light matte finish • Wallplates designed for quick and easy multigang alignment • 1- to 6-gang wallplates available • Works with standard toggle switches • Engraving available, contact Lutron Customer Service • Coordinate with the following Lutron products: - Faedra™, pg.82 - Qoto™, pg.86 - Ariadni®, pg.88 - Glyder®, pg.
PAGE 20
Fassada ™ Dimmers and Fan Controls 1- to 6-Gang Wallplates Controls must be derated in multigang installations Elegant screwless wallplate Two-part wallplate; the front securely snaps on to adapter plate Description Model # Important Information Wallplates Ships in 48 hrs. Controls must have fins broken in multigang installations. Derate dimmers as required, pg.103. Color Palette Matte Finish 1-Gang Wallplate FW-1W: 2.86”(73mm); H: 4.60”(117mm); D: 0.23”(5.