Datasheet

With RS232 computer interface
5000
g
FORCE GAUGE
Model : FG-5000A-232
FEATURES
* Wide capacity, high resolution, high accuracy, * Positive or reverse display direction select.
high repeatability. * Full line accessories ( adapters ) are included.
* 3 kind display unit. * Hand held & stand mounting available.
* Tension & compression capability . * Low power consumption gives long battery life.
* Peak hold ( Max. load ) can be held in display during * Build in low battery indicator.
make tension or compression measurement. * Microprocessor circuit & exclusive load cell
* Zero button can operate both for normal measuring transducer.
& the " peak hold " operation. * Over load protection.
* Full capacity zero (tare) control capability. * RS-232 computer interface.
* Fast/Slow response time push button. * Professional test stand ( optional ).
SPECIFICATIONS
Display LCD ( Liquid crystal display ). Power Supply 6 x 1.5 V AA (UM-3) size battery
5 digits, 10 mm ( 0.4" ) digit size. or DC 9V adapter (not included).
Display Positive or Reverse direction, select by Power Approx. DC 24 mA
Direction the push button on the front panel. Consumption
Function Tension & Compression (Push & Pull). Transducer Exclusive load cell.
Normal force, Peak hold ( Max. load ). Operating 0 to 50 ( 32 to 122 ).℃℃℉ ℉
Peak hold Will freeze the display value of the Temperature
Peak load ( Max. load ). Operating Less than 80% RH.
Zero Zero button can be operated both for Humidity
"normal force" or "peak hold" operation Dimension 227 x 83 x 39 mm ( 8.9 x 3.3 x 1.5 inch ).
Measure 5000 g/176.40 oz/49.03 Newton. Weight 551 g ( 1.2 LB )/with batteries.
Capacity Mounting Mounting holes are provided on the
Resolution 1 g/0.05 oz/0.01 Newton. Holes back case, easy stand mounting.
Min. Display 3 g/0.10 oz/0.03 Newton. Data output RS-232 serial computer interface
Accuracy ± (0.4 % + 1 d), within 23± 5 .℃
Unit select g/oz/Newton Accessories Operating manual ........................ 1 PC.
Update time Fast Approx. 0.2 second. Included Flat-head adapter.........................
.
1 PC.
Slow Approx. 0.6 second. Hook adapter ...............................1 PC.
Over range Display show " - - - - " when in over Cone head adapter ......................
.
1 PC.
Indicator range status. Chisel head adapter .....................
.
1 PC.
Overload Max. 30 kg. 120 mm extension rod..................
.
1 PC.
Capacity Carrying case ...............................1 PC.
Zero/tare Max. full capacity. Optional * Test stand, Model : FS-1001
Control Accessories * Wedge grip, Model : WG-01
Circuit Exclusive microprocessor LSI-circuit. * Software for data logging & data
recorder, Model : SW-U801-WIN
Full Scale Approx. 0.4 mm max. * RS232 cable available for force gauge.
Deflection Model : UPCB-04.
OPTIONAL EQUIPMENT & ACCESSORY
TEST STAND Test stand, cooperate with Force gauge FG-20KG, FG-5000A, whole system will
Model : FS-1001 be become the useful tool for material's tension & compression analysis.
Size : 630 x 250 x 230 mm. Weight : 7.02 Kg ( 15.4 LB ).
Wedge grip Wedge grip, the optional accessory to install to the base of FS-1001 be used to hold
Model : WG-01 the tested material.
SW-U801-WIN Software for data logging & data recorder.
UPCB-04 RS232 cable ( Double femal D9 RS232 cable ) available for FG-20KG-232 or
FG-5000A-232.
* Appearance and specifications listed in this brochure are subject to change without notice. 0604-FG5000A-232