Cut Sheet

SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Diva® 0–10 V Control Wallbox Controls
369147b 2 09.08.14
Specifications
DVSTV- Models
Regulatory Approvals
• UL
® Listed to US and Canadian safety requirements
UL244A
Power
Operating Voltage
120–277 V~ 50/60 Hz
Output Ratings
• Switch rating of 8 A
• 0–10 V control link for 50 mA maximum output,
sink ONLY
0–10 V Control Link
• 0–10 V control link is Class 1
• Controls up to 25 ballasts or drivers (IEC 60929 Annex
E.2 requires the ballast / driver to limit the current draw
to 2.0 mA maximum)
Performance
• Power Pack cannot be used with DVSTV- models.
• Works with all ballasts and drivers that provide a
current source compliant to IEC 60629 Annex E.2,
and whose inrush current does not exceed NEMA410
standards for electronic ballast/driver loads of 8 A
steady state current.
• Adjustable high-end and low-end trim for optimal
dimming performance.
• Power failure memory: should power be interrupted,
the control will return to its previously set level prior to
the interruption when power is restored.
• Captive linear slider.
• Precise color matching.
Environment
• For Indoor Use Only.
• Ambient operating temperature: 32 °F to 104 °F
(0 °C to 40 °C), 0% to 90% humidity.
Application Requirements
• No derating required if ganged.
• Night light not available.
• Always consult local wiring codes.
Warranty
• 1 Year Limited Warranty. For additional Warranty
information, please visit
www.lutron.com/TechnicalDocumentLibrary/
369-119_Wallbox_Warranty.pdf
2