How to Guide

2
Maximum
Description Capacity
1
Model #
HI-POWER 2•4•6
TM
DIMMING MODULES
To increase load capacity up to 30,000W/VA in most popular
sources, use one DV-600P- or DV-603P- and add up to five
dimming modules. Cannot be used with 0-10VDC ballast.
FAN-SPEED CONTROLS
Quiet Controls
For use with one ceiling paddle fan.
Preset Fan-Speed Controls
3
Single pole/ 3-way, 1.5A DVFSQ-F-
3-speed
Note: Does not have soft-glow nightlight. For 3-way and
4-way switching, use with Claro switches or other mechanical
switches.
SWITCHES
3
General Purpose Switching of all
Sources and Motor Loads
Single pole, 120/277V 15A CA-1PSH-
3-way, 120/277V 15A CA-3PSH-
4-way, 120/277V 15A CA-4PSH-
ACCESSORIES
Receptacles
Receptacle
3
15A, 125V CAR-15H-
GFCI Receptacle
3
15A, 125V CAR-15-GFCIH-
Telephone and Cable Television Jacks
A physical barrier (partition) must exist when ganging with
line-voltage products
Single Telephone Jack
4
6-conductor, RJ11 CA-PJH-
Note: Also accepts most 4-conductor plugs.
Cable TV Jack
3, 4
F- STYLE
75-Ohm, coaxial cable jack CA-CJH-
Have Questions? Call the Lutron Hotline [phone]
To order—Call Lutron Customer Service 610-282-3800
Maximum
Description Capacity
1
Model #
DIMMERS
Incandescent
Preset Dimmers with Nightlight
Single pole 600W DV-600P-
Single pole 1000W DV-10P-
3-way 600W DV-603P-
3-way 1000W DV-103P-
Note: The nightlight is visible best on the lighter colors. For
3-way and 4-way switching, use with Claro® switches or other
mechanical switches.
Electronic Low Voltage
Preset Dimmers with Nightlight
Single pole 300W DVELV-300P-
3-way 300W DVELV-303P-
Note: Requires neutral wire connection. The nightlight is visible
best on the lighter colors. For 3-way and 4-way switching, use
with Claro switches or other mechanical switches.
Magnetic Low Voltage
Preset Dimmers with Nightlight
Single pole 600VA (450W
2
) DVLV-600P-
Single pole 1000VA (800W
2
) DVLV-10P-
3-way 600VA (450W
2
) DVLV-603P-
3-way 1000VA (800W
2
) DVLV-103P-
Note: The nightlight is visible best on the lighter colors. For
3-way and 4-way switching, use with Claro switches or other
mechanical switches.
Fluorescent Dimming with Hi-lume® and
Eco-10TM (ECO-Series) Electronic Ballasts
Preset Dimmers with Nightlight
3
Single pole/ 3-way 8A DVF-103P-
Single pole/ 3-way, 277V 6A DVF-103P-277-
Note: Use with Lutron Hi-lume or Eco-10 (ECO-Series) line
voltage control Electronic Dimming Ballasts only. Requires
neutral wire connection. The nightlight is visible best on the
lighter colors. For 3-way and 4-way switching, use with Claro
switches or other mechanical switches.
Fluorescent Dimming with Tu-Wire®
Electronic Ballasts
Preset Dimmers with Nightlight
Single pole/ 3-way 5A DVFTU-5A3P-
Note: Use with Lutron Tu-Wire line voltage control electronic
dimming ballasts only. The nightlight is visible best on the
lighter colors. For 3-way and 4-way switching, use with Claro
switches or other mechanical switches.
1 For capacities in multigang installations see derating pg. 3.
2 Actual lamp wattages.
3 No derating required if ganged.
4 A physical barrier (partition) must exist when ganging with line-voltage products.
Controls