Cut Sheet

/ 0-10 V fluorescent/LED fixture dimmers
(current sink control – power packrequired)
Dimmers*
Single-pole DVTV-XX
1
30 mA max control current
Single-pole DVSCTV-XX
2
30 mA max control current
Control provides dimming signal only. For
dimming with on/off switching, use with Lutron
Power Pack: PP-DV or PP-347H.
Consult ballast/driver manufacturer for specific
ballast/driver current draw to determine maximum
number of ballasts/drivers percontrol.
Compatible with any IEC 60929 Annex E
compliant ballast or driver, available from
many manufacturers (check for IEC60929
compliance on the specification of the designed
ballast or driver, or confirm compatibility with
themanufacturer).
No derating required if ganged.
XX
1
: Gloss color codes, seep. 87
XX
2
: Satin Colors® codes, seep. 87
Wallplates not included. Order separately,
seep. 236
All models must be derated if ganged unless
otherwise noted, seepp. 250 – 252.
*Requires neutral wire connection
Tu-Wire® fluorescent ballast dimmers
Dimmers
3-way/single-pole DVFTU-5A3P-XX
1
120 V 5 A DVSCFTU-5A3P-XX
2
Also compatible with Advance Mark X
ballasts; for further information visit
www.lutron.com/advance.
For information on use with Sylvania
POWERSENSE ballasts, contact Technical
Support at 1.800.523.9466.
90
www.lutron.com/specificationguide | 1.800.523.9466 |
Volume 1 P/N 367-1746 REV C
Designer
wallplate opening
Diva® dimmers, switches, and fan controls