Specification Sheet

Dimmer model numbers Switch and fan control model numbers
Hi-lume® LED drivers:
3-wire fluorescent dimmers*
(small and large controls)
Slide-to-off dimmers
Single-pole (small) NF-10-AA
2
120 V 16 A
Single-pole (large) NF-10-277-AA
2
277 V 8 A
Preset dimmers
3-way/single-pole (small) NF-103P-AA
2
120 V 8 A
3-way/single-pole (large) NF-103P-277-AA
2
277 V 6 A
Exclusively compatible with Hi-Lume LED driver.
For more information on Hi-lume LED drivers,
visit www.lutron.com/HilumeLED.
For 3-way and 4-way switching use N-3PS-
N-4PS- or other mechanical switches.
No derating required if ganged.
Adjustable low-end trim.
0-10 V LED drivers:
0-10 V dimmers (current sink control)
(small controls)
Slide-to-off dimmers
Single-pole NFTV-AA
2
30 mA max control current
Control provides dimming signal only. For
dimming with on/off switching, use with Lutron
PowerPack: PP-120H, PP-277H or PP-347H.
Consult ballast manufacturer for specific ballast
current draw to determine maximum number of
ballasts per control.
For compatible 0-10 V LED drivers by others, visit
www.lutron.com/LED.
No derating required if ganged.
Switches
(small controls)
General purpose switches
Single-pole N-1PS-AA
2
120/277 V 20 A
Single-pole N-1PS-347-AA
2
-CSA
347 V 20 A
3-way N-3PS-AA
2
120/277 V 20 A
3-way N-3PS-347-AA
2
-CSA
347 V 20 A
4-way N-4PS-AA
2
120/277 V 20 A
No derating required if ganged.
Fan controls
(small and large controls)
Slide-to-off fan controls—fully variable
Single-pole fan control (small) NFS-6E-AA
2
120 V 6 A
Single-pole fan control (large) NFS-12E-AA
2
120 V 12 A
No derating required if ganged.
Custom ganging and derating applies,
see pg. 170.
*Requires neutral wire connection.
Nova® dimmers, switches and fan controls
Architectural
wallplate opening
AA
2
: Architectural matte color codes, see pg. 35
(1-gang wallplate included)
40
www.lutron.com | 1.800.523.9466 |