Cut Sheet

10 | Lutron
CASE TYPE DIMENSIONS
A 6.00 in (152 mm)
B 2.96 in (75 mm)
C 6.73 in (171 mm)
D 6.41 in (163 mm)
(mounting centers)
E 1.58 in (40 mm)
F 0.69 in (18 mm)
G 4.61 in (117 mm)
H 1.43 in (36 mm)
For applications where the Compact SE ballast was flange mounted,
Lutron adapter plate CFL-BEA-BK may be required to retrofit the
replacement ballast. Dimensions for the adapter plate are shown below.
8-32 Threaded Stud
0.29 in (7.37 mm)
Adapter Plate
CASE TYPE DIMENSIONS
A 6.00 in (152 mm)
B 2.96 in (75 mm)
C 6.73 in (171 mm)
D 6.41 in (163 mm)
(mounting centers)
E 1.58 in (40 mm)
F 0.69 in (18 mm)
G 4.61 in (117 mm)
H 1.43 in (36 mm)
For applications where the Compact SE ballast was flange mounted,
Lutron adapter plate CFL-BEA-BK may be required to retrofit the
replacement ballast. Dimensions for the adapter plate are shown below.
8-32 Threaded Stud
0.29 in (7.37 mm)
Adapter Plate
A 4.19 in (106 mm)
B 2.96 in (75 mm)
C 2.04 in (52 mm)
D 1.09 in (28 mm)
E 2.00 in (51 mm)
F .52 in (13 mm)
Adapter plates
Lutron adapter plates CFL-BEA-BK or CFL-JBA-FAB may be required to retrofit replacement ballasts.
The CFL-BEA-BK is used when a non-studded B-can is being replaced by a non-studded K-can. The CFL-JBA-FAB is
used when a studded F-can is being replaced by a studded A-can, B-can or K-can. Dimensions for the adapter plates
are shown below.
A 6.00 in (152 mm)
B 2.96 in (75 mm)
C 6.73 in (171 mm)
D 6.41 in (163 mm)
(mounting centers)
E 1.58 in (40 mm)
F 0.69 in (18 mm)
G 4.61 in (117 mm)
H 1.43 in (36 mm)
ADAPTER PLATES
CFL-BEA-BK
CFL-JBA-FAB