Cut Sheet

2.03 SOURCE QUALITY CONTROL
A. All dimming controls shall be 100% function tested at the time of
manufacture. Statistical sampling plan shall not be acceptable.
PART 3 – EXECUTION
3.01 INSTALLATION
A. Contractor shall furnish all devices (dimmers, accessories, & wallplate
kits), labor and other services necessary for the proper installation of
the devices as indicated on the drawings and specified herein.
B. Contractor shall be responsible for derating dimmer capacity if side
sections are removed.
C. Contractor shall run separate neutral wires in 120/208 VAC
installations.
D. Devices shall be installed utilizing manufacturer's recommended
application, wiring and installation instructions.
E. Contractor to provide seamless wallplate covers per specification
2.02 for all devices ganged in a common box. Contractor shall provide
barriers within the box where required by code.
3.02 FIELD QUALITY CONTROL
A. Twenty-four hours a day, seven days a week, global customer service
and technical hotline available.
B. Supplemental information shall be provided by manufacturers Internet
site.
Lutron Electronics Co., Inc.
7200 Suter Road • Coopersburg, PA 18036 U.S.A.
Made and printed in U.S.A. 09/02 P/N 360-395 ©2002
® Controls